Jump to content
SAU Community

Recommended Posts

I have 18x9 inch rims.

Deciding what size tyres to get.

Car is lowered on king springs

Tending towards 235 40 and 255 35 OR 225 45 and 245 40

Give me opinions but I want pictures to help me decide....

I like the look of stretch to be honest but want something "reasonably" practical as well.

PICTURES ARE KEY..so put them up if you have any (please)

More so than the size, will be the tyre brand, and type, that will affect the look. Example; whether it has a rim protector, sidewall stiffness etc.

Here's a picture of 215/45/R17 Federal 595's on 9.5" TE37SL's. Notice how the Federals are quite 'square' and don't give much of a stretched look.

2013-08-16153234_zps215c1721.jpg

2013-08-16153211_zpsfc46ad9f.jpg

2013-08-16153303_zps844cc109.jpg

235/40 on 9" rims is a mild stretch and by far the cheapest. If you want mild stretch at a reasonable price there is no other option worth considering, all round.

It's also the right diameter. Otherwise 235/40 & 265/35 rear is a good mix, but 265/35 is not stretch on a 9" but is a good vertical fitment (you'll need offset over 30 to fit).

265/35/18 Falken Azenis on 18x9

IMG_2510.jpg

But, the tyre design does play a part.

good choice, not a fan of stretch.. if you want a smaller tyre, run a narrower rim

255/35/18 (what I had before I put those Falkens on) were slightly stretched, 245/40 was even more (both KU31). 235 would be stretch regardless of tyre design lol. All down to preference.

265/35/18 Potenza TS-02 on same 18x10. Note they have rim protector, which gives a more stretched look.

IMG_2511.jpg

Tyres are designed to fit a particular range of rim widths. If you "stretch" a tyre, then the rim is probably not within the design range of the tyre. If you run a tyre on a rim that it is not designed for, you run the risk of having insurance invalidated - car will be unroadworthy. And frankly, any tyre technician who stretches a tyre onto a rim should be shot.

Frankly, if you only want, say, a 235 tyre on the car, then get rims designed for a 235 tyre. Don't try and "stretch" them onto a rim designed for a 265 tyre. We'll all be safer on the roads.

Tyres are designed to fit a particular range of rim widths. If you "stretch" a tyre, then the rim is probably not within the design range of the tyre. If you run a tyre on a rim that it is not designed for, you run the risk of having insurance invalidated - car will be unroadworthy. And frankly, any tyre technician who stretches a tyre onto a rim should be shot.

Frankly, if you only want, say, a 235 tyre on the car, then get rims designed for a 235 tyre. Don't try and "stretch" them onto a rim designed for a 265 tyre. We'll all be safer on the roads.

I would like to clarify a few things with you.

Please do not take this the wrong way and THIS IS NOT A PUT DOWN...and while I respect that everyone has their opinions.......

.........However since you were quite "animated" with your response I would like to point out that every single manufacturer / website or person I have interacted with have mentioned that a 9 inch rim should have anywhere between a 235 and 255 tyre !! So first of all running a 265 on a 9 inch rim does not meet your own definition of "roadworthy".

Richards tyrepower suggested a 225 (without me saying a word about any size) just for your information and I have the email correspondence. So please do not shoot them or we will know it is you !! hahahaa

Anyway you rightly pointed out that insurance will be affected with the wrong size tyre and I accept that and thank you for your input.

I have ordered 255 35 18 Ku31s from Tempe ($200 delivered) for the record for the rears. They are out of the other sizes at the moment.

I would like to clarify a few things with you.

Please do not take this the wrong way and THIS IS NOT A PUT DOWN...and while I respect that everyone has their opinions.......

.........However since you were quite "animated" with your response I would like to point out that every single manufacturer / website or person I have interacted with have mentioned that a 9 inch rim should have anywhere between a 235 and 255 tyre !! So first of all running a 265 on a 9 inch rim does not meet your own definition of "roadworthy".

Richards tyrepower suggested a 225 (without me saying a word about any size) just for your information and I have the email correspondence. So please do not shoot them or we will know it is you !! hahahaa

Anyway you rightly pointed out that insurance will be affected with the wrong size tyre and I accept that and thank you for your input.

I have ordered 255 35 18 Ku31s from Tempe ($200 delivered) for the record for the rears. They are out of the other sizes at the moment.

Individual tyres will have a range for them. BTW he didn't say that 265 was recommended for 9", but if you see my picture above, it gives a vertical sidewall.

I would stay far away from a tyre shop who says 225 is recommended for a 9" wide wheel.

Individual tyres will have a range for them. BTW he didn't say that 265 was recommended for 9", but if you see my picture above, it gives a vertical sidewall.

I would stay far away from a tyre shop who says 225 is recommended for a 9" wide wheel.

The picture is 10 inch..i have 9 inch....unless you mean it will almost overlap..and yeah like i said iv already got 255s for the rear

TERRY THANK YOU :)

Edited by jez NF

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...