Jump to content
SAU Community

Recommended Posts

For winning the v8 super taxi race at Winton today.

I didn't expect them to come close to winning in their first year, but they led pretty much from start to finish today. Great job for such a new car.

Link to comment
https://www.sau.com.au/forums/topic/430752-congratulations-nissan-motorsport/
Share on other sites

Mid pack all year then a 1-2 by half a lap, funny how it happens like that.

The engine regulations for the nissans (and maybe the mercs as well, not sure) changed for this weekend. that's why they suddenly got the performance gain. I wouldn't be surprised if they tweak the regulations again after this weekend. If they dominate again tomorrow then I'm pretty sure they will.

I just find it funny that the kelly bros are getting beating by the employees, lol

And the nissan's aero package is slightly better than the ford/gm package (to help make up for their slight deficit in power), so on the Winton track where it's not so much about power, then they have an advantage. So the parity isn't quite equal yet

"They're not even Nissans. Makes me laugh muppets driving their Maximas with Nismo stickers thinking they are driving a race car.

Still not as quick down Conrod as the old Sierra which made more hp on 98 fuel and 2L!"

LOL, couldnt help myself. Good to see Kelly-Nissan Racing bag a result. Moffat for gods sake? Never thought that punk had talent during hid DJR days....

yeah I did enjoy the paying customers beating the Kellys too, just an added bonus. Rick was 14th, Todd 24th.

I'm not sure the Nissans suddenly have more straight line power, if anything they are just getting back to even. More likely that Winton is too tight to let the hp difference matter.

And yes Roy....they've all been sports sedans for 20 years now. That doesn't change the fact it is great to see Nissan putting money into motorsport, and getting something back for it today.

I wonder what the go is with Rick and Todd...at this rate they need to think about just running the team and getting some others in their seats. I thought Todd used to be quite quick...Moffat has left them for dead with all his top 10 finishes.

I know Duncan...i was (poorly) taking the piss out of all the flk that have paid out on the Commos and Falcons for years

Winton rewards cars that have drive out of the corners and good mid corner speed, both things that the Nissan's are supposed to have a lot of, but as others have said, they don't have the top end speed still, but that isn't as much of an issue at Winton as anywhere else on the calender.

i like the look of the hornets over the rest of the field.

re nissan speed.

they where saying that the nissan where trying a different blend of fuel to help with fuel economy.

less weight = better speed?

Yeah they are trying to get better economy or they will have no hope in the enduros unless there is constant safety cars. They are going to struggle at Phillip island, sanddown and Bathurst (especially Bathurst) as it is because of their straight line speed

Great result for Nissan with their fist 1 - 2 finish in a long time.

Winton appears to be a track that requires good mid corner speed and power down out of corners and these are two things that the Nissans are doing well. What is required is some more straight line speed for them to be competitive at other tracks.

There were only 3 cars in the field running E70. Maro Engel in the Merc, Moffat and Caruso. Engel finished ahead of his team mates, which is a rare occurrence seeing as he doesn’t know the tracks. People think something is up with the E70, so tomorrow all cars will be running E85. I will be interested to see if Moff, Caruso and Engel do this well again running E85.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...