Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

I am yet to get a reply from Infiniti since being told they were discussing logistics with Japan. I've also tried to find out from them if a brand new ECU comes out of the factory updated. No response yet.

  • 3 weeks later...

Lets just hope this magical fix actually does something good, and doesn't just reprogram your radio to Jap stations. :P

iknorite? I've read it's fixed the problem for a lot of people, but not all. It also gets rid of the acceleration delay, but takes some of the grunt out of it.

Either way this has bought my car a little more life before being disposed of Salem Witch style.

No I haven't had it done yet, hopefully this week.

They emailed me today to inform me that there is no warranty having the update applied. It is a special circumstance and not something they would usually do, so if I still wanted to go ahead I have to agree to no warranty.

At this stage I'm quite willing as without the update it'll be found in a paddock on fire anyway......

You usually have warranty on workmanship, so if they stuff something up they have to fix it. In this case if they brick my ECU it's just too damn bad.

They explain that they have not tested this update locally as they would normally before using it on a clients car. They don't expect any problems as it is the Nissan update for my car based on my VIN, but in the unlikely event...

Edited by awsam

So Nissan have said they want to double check what they have in hand from Infiniti is in fact for my car and are talking with some Nissan techs somewhere about the details.

Should be making a booking Monday, and hopefully have it done not long after.

Once it's fixed it's on the market according to the missus ;)

No idea on costs yet, but I have a feeling the goodwill and excellent customer service is going to trickle it's way down to the final bill.

Had the update applied today, Nissan changed their mind on supplying an actual copy of the update to the service center, instead Techline did the update & re-tune remotely... Amazing...

They road tested about 60km's worth and it came up well.

The biggest change I've noticed is take off is now incredibly smooth. Prior to the update, a slight push of the accelerator would often give more speed than intended. This would also happen

while the car was rolling.

Auto gear changing is now a lot smoother, although going from 3rd to 2nd still noticeably slams in, but NO WHERE near as bad as before.

There's no longer a delay going from 2,500rpm to 3,500rpm, prior to the update there would be a 1 second delay for me and then it would rev to 3500 as quick as it could. Now it goes

from 2500 - 3500 at the same rate as I push the pedal.

I let it sit for a couple of hours tonight and I did notice some very slight bucking (like 10-20rpm) for about 30 seconds. I'm hoping this is as bad as it gets and this isn't a case like others have had,

where an ECU resent buys you 1-2 weeks of smoothish driving before it learns your habits and starts bucking/hiccuping again.

  • 2 weeks later...

It's almost been 2 weeks after having the update applied. The car runs 90% better, which for anyone who has the same problem is incredible!

The grunt is still mostly there, and the acceleration delay feels 50% reduced. There is no more bucking, hiccups or stuttering. A couple of times i've felt maybe 3 small bucks (like 5% of previous strength) at low gear, but only ever once while driving.

There is no more hesitation from a stopped start at all.

The anti slip control seems to be less sensitive now also.

I highly suggest anyone experiencing my issues with a 2008 V36 sedan have the update applied, even if it's just so you can sell it for more. Main North Nissan charged me $190. If you're in Adelaide, ask for Josh.

Andrew Taylor from Infiniti Melbourne was the man who made it all happen, top guy, went above and beyond for no reward other than the gratitude.

I'm so happy it's fixed, so incredibly happy. Now we can actually sell it for what it's worth :P

Hey Awsam, I'm glad this has worked out for you! Your perseverance paid off. Way to go!

Quick question, could i get a copy of this update so Nissan North Shore, Auckland NZ can do this update for me ? Do you know how ?

Cheers mate

You'd have to get your local Nissan GTR dealership to chase it up. Tell them TechLine Aus has the update. If they're confused they can call Josh Kolinac @ Main north nissan South Australia and he can fill them in.
Nissan won't give the file out, TechLine won't even give it to the Dealership. They drop the file into a remote workspace and do the work themselves.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...