Jump to content
SAU Community

Recommended Posts

Nisasn want $280 for an R32 GTST O2 sensor. That sucks.

I'm hoping the R33 S1 O2 sensor is the same.

Graham West Dyno down in Adelaide apparently knows what aftermarket o2 sensor to use with the rb20det's. He quoted $130.

Edited by Cubes
Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1792513
Share on other sites

So i just read the whole thread....

So coinfusing... People saying different things...

I currentlly have bosch 3 wire white/black/white

and i have bought an aca rox207

which has black/black/blue...

Im gonna hook up like this;

Nissan Ford

white------black

black------blue

white------black

Is this right???

Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1793618
Share on other sites

So your telling me after 21 pages you guys haven't figured out what is a cheap alternative to the stock sensor ... :(

I thought you would be able to get any sensor suitable for a turbo with same thread pattern..all 02 sensors read 0-1v and have a simlar "narrow" band of operation

Thats rough

Edited by benl1981
Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1793630
Share on other sites

Ok.... instantlly heaps punchier....

After the engine warmed up it got really tweaky....

No excesive fuel out the back when i boot it....

Seem to be spooling sooner but not as hard at the top end....

Fuel will take time to figue out if its better.... As i was punching it heaps today hence a big drop in fuel....

Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1796124
Share on other sites

No excesive fuel out the back when i boot it....

Seem to be spooling sooner but not as hard at the top end....

The 02 sensor doesn't affect what you have imagined. :huh:

The 02 sensor is used to tweak afr's at light throttle cruise.

The ecu ignores its output once you stick your foot in to it.

Anything more than limping around it will turn off and use the values from the map within the ecu.

Edited by Cubes
Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1796280
Share on other sites

Well thats what happened....

Seems to be using more fuel at this stage... But yeah as explained its more punchy and is not spewing fuel out the back...

I understand the function of a 02 sensor and have a apexi tt which measures and monitors o2 sensor voltage...

It changes all the time... Your ecu always reads the o2 sendor... Under full load you can reach around 4.3 volts

Idle you get down to 1.2v...

Either way you wanta look at it... The fact remains that it is smoother due to the old one not being able to read more than 3volts....

Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1796947
Share on other sites

Yer your way off Col-GTSX. Go back and do some more reading/googling.

Sorry Buddy. :D

The O2 sensor operates between 0 and 1v and trims the ecu's internal fuel map so the afr hangs as close as possible to stoich (14.7:1).

It can only trim so much, so if you raise fuel pressure or run larger injectors you will find it will simply not work and constantly idle and cruise very rich.

Should the o2 sensor die the ecu will run off the ecu's internal fuel map that is generally slightly on the rich side BUT within the o2 sensors capability to trim enough fuel out to bring the afr's to stoich.

1v being rich 0v being lean. From memory 0.9v is somewhere around 12:1.

The ECU only uses the o2 sensors output at light throttle positions. Nothing to do with wot so it WILL NOT make the slightest difference to fuel spewing out the back.

My RB30DET drops out of closed loop just after the TPS reads 1v.

1v is bugger all when it comes to throttle positions. It does vary slightly but almost always very close low 1v. This is the TPS (Throttle position sensor).

The highest I've seen the o2 sensors voltage hit on the pfc h/c is 1v at approx 4000rpm on the untuned rb25det pfc base map at WOT.

When it does this I do see fuel out the revision mirror if I catch it at the right time.

To help you understand the workings a little better you can have a look at a few datalogs I have taken via the datalogit a few weeks back.

Thats if you wish. :(

Edited by Cubes
Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1797433
Share on other sites

I just given you the results...

I dont understand how it could change it so much...

Im just telling everyone what happened on my car... Checked with a volt meter

Yes it goes up to 4.3 volts...

Not saying i know more than you i just know whats happening on my car at the moment....

Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1798470
Share on other sites

col i've got the exact same o2 sensor as you... the rox one..

when you test it with a volt meter thingy your testing it at the actual wires coming off the o2 sensor right ??

is it possible you got the wrong o2 sensor ?? if its showing more than like 1v and your testing it at the actual o2 sensor it sounds like its not the correct sensor ???

Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1798518
Share on other sites

col have you got another sensor to test ??

it sounds like that one isnt the correct one..

It doesnt sound right that it could be something in your car stuffing up the o2 reading if your getting the wierd reading from the wires coming off sensor its self..

also i dunno bout that ox-207 one.. I know mine was rox-207 if that makes any differance......

Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1799155
Share on other sites

LOL LOL LOL LOL

I made a boo boo...

I was actually testing from the ecu using a power meter in conjunction with my ID-III and it was showing afm voltages....

HAHAHAHAHAHA

The O2 sensor is fine.... Reading less than a volt... Very frequent changes between .3 & .6 area.... So my bad...

As for my results, they still remain the same...

NOTE: I am using more fuel but the new fc tune ill request for a nice easy tune not an outright power tune...

If i want speed ill jump on the R6....

Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1799769
Share on other sites

  • 1 month later...

hey guys just changed my o2 sensor with the rox-207 one....car started perfectly straight away unlike alot of people?...

i was getting about 280-320 km's out of a tank...ill let u guys/girls know how i go in a week whan i use a full tank.....hers hoping 400km's :)

Link to comment
https://www.sau.com.au/forums/topic/43095-o2-sensor/page/8/#findComment-1910078
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...