Jump to content
SAU Community

Recommended Posts

GTR hoon: yes it is the garage defend panel, and yeah the Nismo ne1 exhaust flowed my 324kw easy :)

And I do still have the hks exhaust on, with the lumpy can it sounds so tough

Piggaz: why so little boost... Because stock engine..... And stock studs and head gasket :)

The above will be the next step :)

Sir_rb: yes 380kw was my round figure.... I didn't want to push to much boost as I wasn't keen on doing head gasket and studs just now... Hence only pushing 21.5psi

The car was already at jez's for 3 and a bit months, didn't feel like it being there much longer :P

  • 8 months later...

ok so its been a long while since I updated this,
hasn't had any work done to it for a long time but a month ago got a few things done.

I saw that the temperatures in the coolant and oil were getting a bit higher than usual so I decided to bite the bullet and just change all the cooling

so peace of mind that I knew it was all knew and up to date :)

so I ordered:

greddy oil cooler

koyo radiator

nismo therostat

new radiator hoses

while it was at the tuners I decided I might aswell get other things done aswell due to it being there anyway

so got some arp head studs and tomei valve springs put in aswell :)

car now makes 388kw @ 20psi

post-94184-0-45734200-1414644348_thumb.jpg

post-94184-0-11298100-1414644349_thumb.jpg

post-94184-0-14089500-1414644350_thumb.jpg

post-94184-0-64867800-1414644350_thumb.jpg

post-94184-0-21820400-1414644351_thumb.jpg

post-94184-0-88660900-1414644351_thumb.jpg

post-94184-0-71217900-1414644352_thumb.jpg

post-94184-0-08980900-1414644353_thumb.jpg

post-94184-0-77760200-1414644353_thumb.jpg

  • 1 month later...
  • 9 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...