Jump to content
SAU Community

Recommended Posts

Well, I certainly had a good night.

Massive thanks to Ricky (xntrq) for doing most of the work in setting this up on behalf of SAU-NSW, and an equally massive thanks to the crew at Heasman's Suspension for putting on the feed, drinks and tech night.

Everyone, feel free to post your experiences here, add photos, and whatever else you can think of that was relevant to the night and what you learnt.

Aaaaaaannddddd GO!!!

Many Thanks Ricky for great organisation from our Exec table!

And what can I say about Heasman's!

What a superb Tech Night!

Thanks to Alan Heasman, Brad Heasman for setting this up as a great information night!

Plus the 3 talks given by Paul (Bilstein), Chris (Alignment) and Jonathon (Corner Weighting).

I was riveted to these talks but some of the cars there were definitely a 'distraction'!!!

And thanks to a great bunch of fellow SAU Members. Your behaviour as usual was exemplary...

The new Members deserve a hearty welcome too!

What a great night, learnt alot and how much more i need to look into my suspension.


Thanks to the SAU and Heasmans Steering for hosting this great night!



Here are my pictures =D



Well I had a fantastic night at Heasman's.

It is extremely rare to get an "all access" entry into a workshop like this so had to take full advantage of it by asking at least 150 questions through the 3 areas. I kept the guys on there feet with all the questions but walked out with a huge amount of new knowledge and i'm sure the guys in my group would agree :)

Some topics that really caught my attention were:

- How cheap yet how effective and over looked corner balancing is for a circuit car. A minute change can create a huge difference.

- The wheelbase and track settings for even a regular road car alignment which I have never seen a regular alignment shop look at.

- The huge number of shims and settings available for shocks

- A basic shock being totally upgradable rather than needing replacing.

- The temperatures and cavitation of oil in shocks

I very rarely get wheel alignments (4yrs gap in my Ute) simply because finding a reliable workshop to do a proper wheel alignment is near impossible but after last night I have now found that new workshop (even if it is a 146km drive and $25 in tolls :P)

It is extremely rare to get an "all access" entry into a workshop like this...

... :P)

Absolutely spot on Ben...

In '06 I was tossed out of a Sant A'gata Workshop by none other than Mr Winklemann whilst filming technicians on Lambos - lol > caught on film too > I should show it at the SAU Clubhouse one night

Many many thanks Colin for the photos :)

Having visited Heasman's the previous week I was extra excited for the tech night and it absolutely did not fail my expectations. You can really tell every single guy there knows their stuff which is very reassuring.

Here's a few of my pictures.

post-99360-0-13603700-1378517063_thumb.jpg

post-99360-0-48184700-1378517066_thumb.jpg

post-99360-0-89955100-1378517069_thumb.jpg

post-99360-0-59891000-1378517072_thumb.jpg

post-99360-0-78029400-1378517075_thumb.jpg

post-99360-0-07725100-1378517080_thumb.jpg

post-99360-0-31884700-1378517083_thumb.jpg

post-99360-0-29157600-1378517086_thumb.jpg

Thanks to everyone involved in organizing the night.

It was good to hear the information on setups from the professionals rather then some of the stuff floating around on the net.

Thank you Heasmans for the suspension education. Even the more difficult questions were answered on the spot regarding roll centre and bump steer. My highlight was the wheel alignment presentation and camber and toe angles for more street/drag oriented cars explanation. I know from past experience that wheel alignment perfection is an art form of patience. No more sounds like... [Wax] quick and careless wheel alignments for me.

What was also interesting is that they do roll cages in house too.

Thank you to Terry for the lift home afterwards.

Damn! Having worked next to a suspension shop when I was a second year apprentice, I learnt a fair bit. Suspension set up is an art form & I definitely didn't want to miss this!!! As Benm said about finding reliable workshops to do this sort of stuff (even a basic w/a), its hard to find a workshop that knows what they're doing, AND, its something you can't readily check. I'm with you Ben, its worth the distance for the best set up!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...