Jump to content
SAU Community

Recommended Posts

Not sure. I never sent him a clutch and they looked new.?

Haha. I paid for the box.

A mate had his HKS twin rebuilt by jb and it lasted and drive very well. So not knocking the guys work. It's just I didn't have much success with the heavy single with a mix of street and track.

I've told him 1100 nm and for safety he suggested solid centre clutch not as good on street but less likely to have issues, I touched on exploding subject and he said its the centre bit can't remember exactly but the part in middle of clutch plate that usually fails and it can't in solid for some reason? But the failures reported on this forum are mostly pressure plate related it seems ? Anyway I will ask him straight out tomorrow

Was it the clutch fault or some other part that caused it?

Buy a nismo copper mix and have piece of mind knowing your car won't be a write off

I have nasty photos of one that died (not my car) and won't use one because of them

I seriously doubt the Nismo copper mix is made by exedy.

Don't skimp on the clutch

yeah kind if agree here, its not something you want to have to replace too often....that said i picked up a refurbished NPC with flywheel cheap as chips and its been faultless....wanting the best doesn't always have to mean 2500$ worth of Nismo...just means you should do your homework...

Well I will let u know how I go, I've spoken to Jim again about the failures and to me seems fair enough , these things happen and I guess it's what insurance is for in the end, he seems very honest and open about the various subjects so I'm pretty sure mine will be fine. I'm sure other manufacturers have had clutch failures but we don't hear about them, anyways looking forward to 450kw at the strip

I think youd definitely year about exploding clutches on SAU. Especially the big boys, exedy, nismo, npc, os.

Anywho, you will need a twin for 450. It would be 10000000000x nicer to drive than a unsprung clutch. Imagine taking a sledgehammer to your gearbox with every gear change. That is what 4500lb clamp load sounds like haha.

Go nismo or NPC. Both have good rep

Yep that's what he said, u guys have me suitably worried now... Is it true the excedy twin plate is same as nismo? There is one going for a good price I know of

no the nismo clutch plates are made by velo, but I doubt they are allowed to sell them to anyone but nissan/nismo

Funny. You ask the question and hear not so good revues, then do your own google search, find more horror stories and still go with mega clamp solid centre single? Make sure you have a spare gearbox is all I'll say.

Good luck

I hear you... I really do. But there are stories of nismo, npc and others letting go too, please don't think I havnt considered your suggestions but in talking to Jim he was happy to explain what happened and my tuner hasn't had any issues so I just decided to go with my original plan but actually the only horror stories are in sau in the wider google search nothing of note came up under my search queries anyway I hope u don't get to say I told you so buy time will tell

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...