Jump to content
SAU Community

Recommended Posts

You are looking at spending 10k to have it pull hard..

You will spend a lot less if you get your stock turbo highflowed to the right profile, it will definitely give you the pull hard effect and will cost you a lot less.

I reckon a Hypergear G3.5 highflow will do a good job of the desired task, the delivery will give monster pull without being a pig to drive.

Before you ask, you will need a full 3" TBE, FMIC, fuel pump, injectors and an ECU at a minimum.

Link to comment
https://www.sau.com.au/forums/topic/433565-gt35r-or-gt30r/#findComment-7069538
Share on other sites

It's not rocket surgery.

It's not brain science either.

GTScotT is offering some sound, experience based advice. He's also considering the driving outcome and financial aspect of things.

However if you are chasing a 500rwhp setup you won't likely get there with a GT30 setup. Go the GT35 and be mindful of people's comments to this point.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/433565-gt35r-or-gt30r/#findComment-7069729
Share on other sites

At the moment no one has given me a answer or opinion on what one would be more suitable

Yes they have...this:

I reckon a Hypergear G3.5 highflow will do a good job of the desired task, the delivery will give monster pull without being a pig to drive.

and see also:

Look at the rb25 dyno results thread. It's not rocket surgery. People don't have to tell you what to do, you can figure it out yourself sometimes!

and forget the GT35

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/433565-gt35r-or-gt30r/#findComment-7069772
Share on other sites

3076 56T with a .63 on E85 hits like a sledgehammer...

the hypergear stuff in same size are a more linear pull and deceptively quick, but probally faster no doubt

guess it depends what you after, i have no idea what a 3450 feels like on a rb25, only 25/30's and 30s's

guessing boost response would be fairly bad on a manual

cheers

darren

Link to comment
https://www.sau.com.au/forums/topic/433565-gt35r-or-gt30r/#findComment-7069900
Share on other sites

Glad you put that 3 inch cooler piping, talk about overkill. You can make an easy 300kw on 2.25 inch piping.

Stop slapping parts on and read, there is so much information here you should be able to work out what you need, then see if you can go for a spin in a few members cars to get a feel for the response. I am guessing the GT35 will be a little too laggy if you plan to drive it daily.

Link to comment
https://www.sau.com.au/forums/topic/433565-gt35r-or-gt30r/#findComment-7070093
Share on other sites

Read this thread - ultimate RB "pull hard" setup, make numbers in the range of GT35R peak power but spooling similar to the smaller GT30 range turbos:

http://www.skylinesaustralia.com/forums/topic/426059-forced-performance-hta-turbos/

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/433565-gt35r-or-gt30r/#findComment-7073476
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...