Jump to content
SAU Community

Recommended Posts

Hey Peps

I just bought R32 GTR Rims for my 32 gtst, They fit well with 205/55/16 tires on them however its currently stock height. Just wondering if I lower what tire would be best to run, also how low should I go, keeping in mind it's a streeter and I don't want too much cop attention. Thanks =)

Link to comment
https://www.sau.com.au/forums/topic/433573-32-gtr-rims-questions/
Share on other sites

The ride height has (generally) very little impact on the tyre size required. After all, you are lowering the car by adjusting the suspension, not the height of the tyre.

There are threads, admittedly years old, that detail the optimum lowered ride height for the R32.

Bob - 205/55R16 is the standard tyre for a (R32) GT-R. 235 is too wide to be fitted to the standard rim - it will cause the speedo to read under (tyre will be "puffed" to a larger rolling diameter). If you start playing with profiles you need to adjust the rim diameter accordingly (lower profile, larger rim diameter). Since Caz already has the rims, it would be pointless to start playing with tyre profiles.

I wouldnt change the tyre size because you'll end up with your speedo a couple of km/h out

Just lower it properly and you should be right with the current tyres

And yeah I used to have 32 GTR rims on my 33 GTS-t and they were 225's I thought the 205's were 32 GTS-t rims? From what I can remember they have the same style rims just in different sizes

Absolutely the case that R32 GTSt standard tyre size is 205/55-16 and R32 GTR is 225/50-16 and that these have almost exactly the same sidewall height.

235/50 on GTR rims makes the sidwalls a little too tall. 235/45 on GTR rims makes them a little too short. For 235s you ideally need 17" rim to make the 45 profile work.

If you don't mind a little bulge and can find suitable tyres, 245/45 on GTR rims are a bit closer match.

R32 GT-R wheels are 8" so 205 is plenty skinny. Roll the guards for more width!

You can look at running more negative camber to make them fit. Note that depending on height, the rear can change to -2.5° (too much), so you'll have to look at getting adjustable upper arms.

Run 225/50/16 IMO
  • 5 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...