Jump to content
SAU Community

Recommended Posts

Hey Peps

I just bought R32 GTR Rims for my 32 gtst, They fit well with 205/55/16 tires on them however its currently stock height. Just wondering if I lower what tire would be best to run, also how low should I go, keeping in mind it's a streeter and I don't want too much cop attention. Thanks =)

Link to comment
https://www.sau.com.au/forums/topic/433573-32-gtr-rims-questions/
Share on other sites

The ride height has (generally) very little impact on the tyre size required. After all, you are lowering the car by adjusting the suspension, not the height of the tyre.

There are threads, admittedly years old, that detail the optimum lowered ride height for the R32.

Bob - 205/55R16 is the standard tyre for a (R32) GT-R. 235 is too wide to be fitted to the standard rim - it will cause the speedo to read under (tyre will be "puffed" to a larger rolling diameter). If you start playing with profiles you need to adjust the rim diameter accordingly (lower profile, larger rim diameter). Since Caz already has the rims, it would be pointless to start playing with tyre profiles.

I wouldnt change the tyre size because you'll end up with your speedo a couple of km/h out

Just lower it properly and you should be right with the current tyres

And yeah I used to have 32 GTR rims on my 33 GTS-t and they were 225's I thought the 205's were 32 GTS-t rims? From what I can remember they have the same style rims just in different sizes

Absolutely the case that R32 GTSt standard tyre size is 205/55-16 and R32 GTR is 225/50-16 and that these have almost exactly the same sidewall height.

235/50 on GTR rims makes the sidwalls a little too tall. 235/45 on GTR rims makes them a little too short. For 235s you ideally need 17" rim to make the 45 profile work.

If you don't mind a little bulge and can find suitable tyres, 245/45 on GTR rims are a bit closer match.

R32 GT-R wheels are 8" so 205 is plenty skinny. Roll the guards for more width!

You can look at running more negative camber to make them fit. Note that depending on height, the rear can change to -2.5° (too much), so you'll have to look at getting adjustable upper arms.

Run 225/50/16 IMO
  • 5 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...