Jump to content
SAU Community

Recommended Posts

Loooking for anyone who has purchased the 324mm brake caliper spacer (http://www.gktech.com/index.php/r33-gts-t-caliper-bracket-to-suit-324mm-r33-gtr-rotor-628.html) and has experience with using it on track.

Will it be reliable enough for track/circuit work over sustained periods? I'm just concerned that over a prolonged heat period with multiple heavy stops the bracket may warp and damage other components.

Edited by dan.1337

I run the 280mm to 324mm on my track car and it's doing just fine after 3 track days.

There shouldn't be excessive heat on the component, nothing like a brake disc itself.

IMO it is of high quality with the proper fittings. However it always pays to double check everything is tight before heading out.

  • 3 weeks later...

bracket is good quality, thick aluminium with steel thread inserts. For me, and has been confirmed by a few others, they weren't 'bolt-on', there's a reasonable amount of grinding and shaping the inside of the caliper to allow it to fit over the 324mm disc and still reach the mounting holes on the brackets. I was sceptical on doing this but if you have a look at a photo of the caliper pulled into 2 halves, you don't come anywhere near the fluid tube that runs through the middle, so not that much of a big deal, but a bit to be grinded out.

Short hard line running off caliper also doesn't match to mounting bracket either of course with the caliper moved down/out. I wasn't keen on leaving the brittle hard line unsupported so got their brake lines as well that mount straight into the caliper.

Only done on weekend so still in the bedding in stage but difference is immediately noticeable, as soon as you start to touch the brake pedal.

Hope that helps.

nah I don't sorry mate...you should probably ask GK Tech, the company who makes them, how much needs to be ground off, and why they don't give any information, guidelines, photos, anything at all, on the "install" tab on their website, and why they tell you they're a straight bolt-on fitment...which they know is bullshit.

nah I don't sorry mate...you should probably ask GK Tech, the company who makes them, how much needs to be ground off, and why they don't give any information, guidelines, photos, anything at all, on the "install" tab on their website, and why they tell you they're a straight bolt-on fitment...which they know is bullshit.

Faq's taken from the gktech website directly below the product description

How hard are these to install?

The brackets are very easy to install. Simply bolt them to the knuckle and you're on your way. To install the larger rotors you need to trim the dust cover and depending on your calipers, you'll need to shave the bit that hits on the rotor, up to around 2mm's. You'll see which bit needs to shave based on what the rotor touches. It's a very self explanatory install and shouldn't take longer than 45 minutes.

  • 2 weeks later...

Having a bit of trouble trying to figure out what goes where. Did the brackets come with instructions? If so, could someone please scan and post them up? I don't have any because I bought them second hand.

I've taken a couple of photos from the drivers side. Just want to check if the bit of caliper circled in yellow is the bit I'm supposed to shave to get the bracket to fit. GKTech's instructions say " shave the bit that hits on the rotor, up to around 2mm's"...and I know that this bit circled in yellow will never go near the rotor.

Or do I have it all wrong?

Second pic is of the way i think the bracket is supposed to be mounted (drivers side).

Appreciate any assistance.

post-23053-0-84322100-1385276720_thumb.jpeg

post-23053-0-93249700-1385276730_thumb.jpeg

Yeah thats not right mate, will email u some details tomorrow

Thanks for the pics of your install. I'll put up more over the next few days as I get mine on.

Unfortunately the grinding away of the caliper is proving to be a right PITA and I'm chewing through Dremel grinding wheels doing it. Managed to get through half a caliper before needing to replace the grinding wheel, so it'll be at least 4 wheels to get them all done.

The other way which might work is to use a metal file, but that would be difficult to get into some of the bends.

With the dust cover, I was able to just bend the top edge toward the car by about 1-2cm all the way around by hand so it cleared the rotor and I'd keep the dust guard.

Not really sure why the bracket wasn't designed with the caliper holes just 2mm further out in the first place?

Not really sure why the bracket wasn't designed with the caliper holes just 2mm further out in the first place?

haha. I had a few emails back and forth with them about this....

To grind mine, i took the calipers off, did the main part pushing them up against a bench grinder to take out the bulk of it, then used a carbide burr to get the harder to reach bits, then a metal file to smooth it out. Not sure about dremel grinding wheels but one of these works a treat

http://www.ebay.com.au/itm/Chieftain-Carbide-Burr-Double-Cut-SL-2-/151175368194?pt=LH_DefaultDomain_15&hash=item2332c10e02

these rip the shit out of anything, don't need much pressure on the aluminum caliper, just skim across the surface to get nice n even.

Why keep the dust shields btw? they just get in the way and trap heat IMO, but up to you of course..

While installing the bracket I've encountered a problem. I've been grinding away (thanks hardsteppa for the tip about the carbide burr, I found one in my Dremel kit and it helped a lot), but if you see the yellow circle second picture I've attached, I've actually hit the hole circled in blue in the third picture.

I've probably only cut away about 1mm, but that's all the meat there is before you hit the hole. What's worse is that the caliper STILL doesn't clear the rotor as the rotor continues to scrape slightly in places.

So, before I can even try it on track, I can safely say it's no good for track work as the rotor will expand with heat and eventually grind up against the caliper. I can't cut away any more caliper or I'll just be cutting into the tunnel where the bolt holds the caliper together.

All GKTech needed to do was put the hole 3mm out and it would have been perfect. Now I'm down about 3-4 hours of grinding time, whatever the bracket and grinding tools cost, and have a stuffed caliper.

If I had my time again, I would have wasted my money on something else.

post-23053-0-95370100-1385461616_thumb.jpeg

post-23053-0-81995700-1385461625_thumb.jpeg

post-23053-0-67167500-1385461633_thumb.jpg

Edited by dan.1337

now that's really fuarked...

Time to hit up: www.accc.gov.au/‎

After all, they are an Australian Store and it was false advertising.

hey Dan,

you're right, it is a fair bit of stuffing around grinding/test fitting, grinding more, took me a few hours to get done too. When I had taken out a fair bit and it looked like fitting, i spraypainted over the grinded area and then ran it again, so could see where the disc was actually still rubbing, as otherwise it's very hard to see on what spot it's still hitting and otherwise will just end up grinding away at sections that don't need it.

Even after fitting, under heavy braking the slight amount of flex would see the caliper push onto the disc again and give a grinding sound, so another slight trim was needed but no trouble since then.

Sucks about hitting the bolt tube but shouldn't really matter from a function point of view i would think? I didn't hit mine but looking at the photo, would say it would only be hair-thickness of metal left before breaking through.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...