Jump to content
SAU Community

Recommended Posts

REVEALED: NISSAN GT-R NISMO
-- Nissan GT-R Nismo Joins 2014 Nissan GT-R --

  • World premiere of race-inspired version of Nissan's legendary GT-R
  • 600hp (441kw) for blistering performance
  • Advanced aerodynamics generating additional 100kg*1 of downforce at 300km/h (186mph) for exceptional road-holding

YOKOHAMA, Japan (November 19, 2013) – Records fall and dreams come true with the debut of the Nissan GT-R Nismo. This race-oriented model delivers “factory tuned" supercar dynamics with revolutionary enhanced aerodynamics and ultra-precise handling. The Nissan GT-R is already established as one of the best performing supercars in the automotive sphere, and now Nissan has drawn on decades of racing experience gathered by Nismo, the brand's motorsport specialists, to develop the ultimate Nissan GT-R.


The Nissan GT-R Nismo features exclusive styling that embraces the longstanding racing philosophy of form following function. It has numerous motorsports-inspired technologies to enhance the car's performance through optimised aerodynamics, suspension and powertrain, creating a well-balanced machine that is at home on both the road and track.
The Nissan GT-R Nismo will be available in Japan in late February 2014, U.S. and Europe later in 2014.
Nissan CEO Carlos Ghosn says this is the fastest Nissan GT-R ever. "With a 7:08.679 lap time, we can authoritatively say that the Nissan GT-R Nismo*2 holds the volume production car lap record at the Nürburgring Nordschleife, which is the gold standard of high performance achievement."
Nissan GT-R Nismo Overview - Flagship of the Nismo lineup
1. Mechanical Features
Nissan GT-R Nismo employs innovation, uncompromising engineering and motorsports-inspired technologies to achieve new levels of power, speed and handling.

Engine

  • Under the hood, the 3.8-liter V6 VR38DETT engine benefits from the know-how that Nismo has gained from participating in such events as the world-renowned Nürburgring 24 hour race. Engine power has risen and is now rated at 600PS (441kw) and 481 lb ft (652 Nm) of torque.
  • New high-flow, large capacity turbochargers, which are used for GT3 racing, improve breathing, while optimized individual ignition timing control for each cylinder and upgraded fuel pump improve combustion.

Chassis

  • The springs and custom-developed Bilstein DampTronic dampers in the front and rear suspension are specially tuned to deliver exceptional grip levels and progressive handling response at the limit. Three suspension modes can be selected: Comfort, Normal and R, for circuit applications.
  • Exclusive Nismo tires – developed by Dunlop - exhibit outstanding grip and handling characteristics. Front: 255/40 ZRF20; rear 285/35 ZRF20.
  • Specially-developed links fitted to the front double wishbone suspension increase castor trail to optimize wheel position during high-G cornering and improve straight-line and cornering stability. Additionally, large high-rigidity bolts are used to increase stiffness of the wheel-hub attachment area.
  • To minimize body-roll during cornering and changes of direction, the Nissan GT-R Nismo features a 17.3 mm hollow rear anti-roll bar which raises roll stiffness while reducing weight.

Body construction

  • Increased rigidity in the bodyshell is achieved using adhesive bonding in addition to spot welding leading to precise suspension response under extreme load, the Nismo “factory tuned" enhancement.

2. Exterior design - Exclusive styling with improved aerodynamics

  • Using the latest Computational Fluid Dynamic simulation techniques to analyze airflow, Nismo has developed an aero package that improves road-holding, minimizes the negative impact of drag, while giving the car a menacing and muscular appearance.
  • Together, the front bumper, engine undercover strake and carbon rear spoiler increase downforce, lowering the center of gravity and generating an additional 100kg*1 (at 300km/h) compared to the freshly updated 2014 Nissan GT-R model. The car's aerodynamic characteristics are tuned to ensure the downforce is equally spread front to rear at all speeds for progressive handling characteristics. A widened front bumper configuration and elongated yet tapered rear bumper design keep the drag to Cd 0.26, same with that of 2014 Nissan GT-R.
  • The Nissan GT-R Nismo will be available in five body colors: Brilliant White Pearl, Meteor Flake Pearl Black, Ultimate Metallic Silver and Vibrant Red. And unique to the GT-R Nismo model, a Dark Matte Grey*3 accentuates the car's imposing exterior muscularity.
  • The GT-R Nismo's black 6-spoke wheels are inspired by Nissan's GT-R race car which races in the GT500 class in SUPER GT.

3. Interior

  • The Nissan GT-R Nismo cockpit inspires driver confidence through both its craftsmanship and optimized driving position.
  • Ergonomically sculpted carbon-fiber-backed reclining RECARO seats (Europe/Japan) comfortably, yet firmly, support the driver and front-seat passenger.
  • Nismo racers influenced the design of the steering wheel which is dressed in Alcantara®, with three spokes, red center mark and red stitching to give the best combination of grip, feedback and comfort.
  • The combi meter has carbon-like finish, and tachometer features a red design. The meter hood is also dressed with Alcantara®.
  • Interior trim features include discreet red stitching on the seats, center console, door trim and steering wheel.
  • *1: Compared to 2014 Nissan GT-R
  • *2: Nissan GT-R Nismo with track options
  • *3: Dark Matte Grey will be available starting from summer in 2014.

http://www.gtrlife.com/forums/topic/92279-2015-gtr-official-info-nissan-shifts-focus-to-refinement-introduces-gt-r-nismo/

Edited by GT-R OZ
Link to comment
https://www.sau.com.au/forums/topic/435234-2014-r35-nismo/
Share on other sites

Great time. The styling of the nismo offering looks absolutely horrid. HSV horrid. They obviously do not understand what people are looking for. Great they are pushing the boundaries otherwise, I guess, although I suspect the driver and tyre are most of what is going on here..

Link to comment
https://www.sau.com.au/forums/topic/435234-2014-r35-nismo/#findComment-7113832
Share on other sites

I think it looks awesome! Surely the same minds who have been steadily improving the original R35 have been involved in this design.

I found some great photos on supercars.net http://www.supercars.net/cars/6243.html. Some of the parts look $$$, I hope someone with better computer skills than myself could link some of these up for everyone to appreciate!

Get that up ya Porsche!

Link to comment
https://www.sau.com.au/forums/topic/435234-2014-r35-nismo/#findComment-7115126
Share on other sites

the car is 2% faster with how much % extra power and new tyres? and it's all aero? doubt it. the tolerance and variance is so small overall in reality, this is all marketing to get idiots to pay $100k more for a few extra bolt on plastic canards etc. seems to be working anyhow. cool car nontheless.

Link to comment
https://www.sau.com.au/forums/topic/435234-2014-r35-nismo/#findComment-7115296
Share on other sites

You know it's not that simple. Increase power (and what is the average power over the whole lap...?) is subject to diminishing returns. Could it have done better on Michelins? The driver, shit, how much of a difference does that make?

Remember it weighs less too, an advantage for most of the time (acceleration), but that's countered by an increase in downforce which negates it also (overall weight increase at certain speeds).

It's a 16s improvement on a 444s total time. So in your terms, a 3.5% improvement for $100k (+50% on a stock car).

If you want to do better again, buy a Porsche 918 which costs US$845k MSRP vs a GTR NISMO of $200k MSRP. For $645k (+422.5% of the cost) you get a 2.5% improvement. And it's not the aero, four wheel grip, tyres, power or all the development Porsche put into it no? Or too hard to tell?

We just have to let the time talk.

I think it makes the GTR NISMO appear decent value when not else comes close.

Link to comment
https://www.sau.com.au/forums/topic/435234-2014-r35-nismo/#findComment-7115466
Share on other sites

I like the look

I'd love to see what an AMS modded GTR would do around the ring to see how much the ridiculous power affects the laptime. You could then discuss how much bang for buck the modifications really add.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/435234-2014-r35-nismo/#findComment-7117644
Share on other sites

I like the look

I'd love to see what an AMS modded GTR would do around the ring to see how much the ridiculous power affects the laptime. You could then discuss how much bang for buck the modifications really add.

I was thinking same. it would be great to see how even a mildy modded R35 with decent (non-factory) rubber and equivalently skilled driver would go around there :)

Link to comment
https://www.sau.com.au/forums/topic/435234-2014-r35-nismo/#findComment-7118034
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...

Any confirmation that it will be available in Australia? If so has there been any drive away price speculations?

l

This is the first R35 that I like, makes all the previous R35's look quite dull.

So Far, GR-R Nismo's production rolls out in Japan later this month (February 2014) - estimated price in USD is nearly $200,000.

Europe and United States are expected to have the Nissan GT-R Nismo (R35 Skyline) available later this year - perhaps September.

There is a large Australian interest in the GT-R Nismo; however, I would imagine that imports would have to be done personally thru Japan, as there hasn't been any PR regarding any other planned availability to other Country's. Additionally, planned production likely will not surpass 1000 cars (nismo models).

Source: Nissan GTR Nismo

We really don't know what to expect this early on in 2014... but lots of information will become available over the next month as Japan rolls out production.

Link to comment
https://www.sau.com.au/forums/topic/435234-2014-r35-nismo/#findComment-7198781
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Why are people so insistent on making dirty water?!
    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...