Jump to content
SAU Community

Recommended Posts

If they police it heavily it could sway things quite a lot. In the middle of a race if they are losing time to the car ahead they wont know if its because they are taking life out of tyres or they are slow in a sector. I am all for it. Its like cycling, team radio has taken away so much from the sport with breakaways and chasing pack all abreast of what the others are doing....take the gamble and individual strategy out of it.

I think its a great move as the cars are no longer driven flat out lap after lap and its a race of reserved pace, which with pit radios makes it all prescribed from pit wall. This will be a rather large curve ball

I wonder if all we're going to get is a bunch of "codes", like the infamous multi 21, given to the drivers over the radio?

Make a rule, they'll find a way round it.

Yep or it will pop up on the steering wheel display

I wonder if all we're going to get is a bunch of "codes", like the infamous multi 21, given to the drivers over the radio?

Make a rule, they'll find a way round it.

Of course they will find a way around it. Foolish rules like this make fools of everyone.

"Fernando is faster than you" - is that now banned or just a statement of fact for Kimi?

ferrari or merc is my bet to get pinged first breaking this ridiculous rule

ferrari won't get pinged for it. they'll just do it and get away with it on a flimsy technicality.

i think the ban is a bit stupid. you can get around it so easily with a coded or appropriately timed message that the driver knows you're referring to his current corner as the one he needs to focus on.

The FIA’s Charlie Whiting has sent the teams a further technical directive clarifying what can and cannot feature in pit to car radio conversations from the Singapore GP onwards.

Seen by this writer, the document confirms that a lot of technical information will also be banned from appearing on pit boards.

In some instances, regarding tyre and brakes, the ban has been postponed until the Japanese GP.

In addition the FIA has specifically targeted “any message that appears to be coded.”

The FIA has confirmed that the restrictions “apply at all times the car is out of its garage during the Event,” which means all practice and qualifying sessions are included.

Messages not permitted (either by radio or pit board)

Sector time detail of a competitor and where a competitor is faster or slower.

Adjustment of power unit settings.

Adjustment of power unit setting to de-rate the systems.

Adjustment of gearbox settings.

Learning of gears of the gearbox (will only be enforced from the Japanese GP onwards).

Balancing the SOC ['State of charge', ie ERS battery charge level - AC] or adjusting for performance.

Information on fuel flow settings (except if requested to do so by race control).

Information on level of fuel saving needed.

Information on tyre pressures or temperatures (will only be enforced from the Japanese GP onwards).

Information on differential settings.

Start maps related to clutch position, for race start and pit stops.

Information on clutch maps or settings, eg bite point.

Burn-outs prior to race starts.

Information on brake balance or BBW settings.

Warning on brake wear or temperatures (will only be enforced from the Japanese GP onwards).

Selection of driver default settings (other than in the case of a clearly identified problem with the

car).

Answering a direct question from a driver, eg “Am I using the right torque map?”

Any message that appears to be coded.

Messages permitted (for the avoidance of doubt)

Acknowledgement that a driver message has been heard.

Lap or sector time detail.

Lap time detail of a competitor.

Gaps to a competitor during a practice session or race.

“Push hard,” “push now,” “you will be racing xx,” or similar.

Helping with warning of traffic during a practice session or race.

Giving the gaps between cars in qualifying so as to better position the car for a clear lap.

Puncture warning.

Tyre choice at the next pit stop.

Number of laps a competitor has done on a set of tyres during a race.

Tyre specification of a competitor.

Indication of a potential problem with a competitor’s car during a race.

Information concerning a competitors likely race strategy.

Yellow flags, blue flags, Safety Car deployment or other cautions.

Safety Car window.

Driving breaches by team driver or competitor, eg missing chicanes, running off track, time penalty will be applied etc.

Notification that DRS is enabled or disabled.

Dealing with a DRS system failure.

Change of front wing position at the next pit stop.

Oil transfer.

Wet track, oil or debris in certain corners.

When to enter the pits.

Reminders to check for white lines, bollards, weighbridge lights when entering or leaving the pits.

Reminders about track limits.

Passing on messages from race control.

Information concerning damage to the car.

Number of laps remaining.

Driver instructions from the team to swap position with other drivers.

Test sequence information during practice sessions, eg aero-mapping.

Weather information.

Pit to retire the car.

http://adamcooperf1.com/2014/09/15/f1s-radio-ban-full-details-of-what-is-and-isnt-allowed/

Some of them kick in at Singapore, others like tyre and brakes take effect from Japan.

Pretty dumb if you ask me. Implement strict 100kg fuel limts. Ban teams and drivers from talking about fuel during race.

You can't tell your driver when to back off to save fuel, but you can tell him when to push and not save fuel. huh?

No talk about ERS states and adjustments might mean people will retire due to problems with the system. Same goes for brake temp/wear but it's pretty easy to configure dash warning for that one and any driver seeing a rear brake temp/wear issue would know how to handle that. Not neccesarily so easy with ERS.

Edited by hrd-hr30

I wonder if the teams will start sending additional info to the drivers steering wheels or something, given the amount of technology in those wheels its probably possible for them to do that. I guess it could still be considered a radio transmission though so who knows.

The whole thing seems a bit ridiculous, especially with it being applied to the practice sessions as well.

The cars can't receive data they can only send it.

That's why the driver has been told in the past to change the computer setting on the steering wheel, the teams can't change it for them.

I think given the complexity of the cars and how new the power packs are, this year (at least) there needs to be information sent from the car. I might be alone here, but I think it would be pretty crap if 10 cars broke down in the one race.

I don't know if my point is really coming accross in what I'm saying but anyway. To me I think some data from the car is good, if it is only used to tell the drivers the car is overheating, exceeding required fuel economy. I dunno, I absoloutly see what people mean about the drivers needing to think while racing, but to me they are there to drive, and have enough to think about without scrolling through menu's telling them engine,ERS etc temps, fuel consumption, lap time (and delta) along with activating DRS, KERS (To a lesser degree this year albeit), and changing settings

I'm not against the ban on radio transmission/instructions that they are imposing at all though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...