Jump to content
SAU Community

Recommended Posts

OP, if I was in your shoes, this is what I would do.

Seeing that it's a street car ONLY, leave the engine in, put 6-6.5 litres in the sump and drive it (middle of the hump). I don't believe it's cost effective to pull the engine, sump off, pump, baffles then put it back in. You've just done a half assed job. If you're going that far you may aswell spend the little extra and give it a freshen up (IE Ring's and bearings. While you're there pistons and rods... Very easily get out of hand). We are now talking about a rebuild.

If and when the time comes, then do all the above.

Well the engine is coming out regardless because I'm respraying the whole car a different colour including the engine bay, so I will speak to them about doing the rest of the work as well as it's out, it's going to make sense in the long run I guess.

Yeah I certainly wouldn't pull an engine out just to spray paint the bay especially if the engine doesnt NEED work

To do a good paint job it has to come out or it's all just going flake off I don't plan on painting it again, doing it all properly once.

Paint the car and do the engine bay when the motor lets go cause its going to happen soon enough lol I cant believe Croydon told you to pull the motor, put an oil pump and sump on it and leave the rest..... if your dead set on painting the whole car then get the motor rebuilt and do it all at once.

There is no reason that CRD should damage the engine bay, i dont recall destroying anyones freshly painted engine bays when i pulled motors on GTR's.... there is heaps of room to work with when you have done lots of them ;)

As for the sump and pump, CRD use Performance Metalcraft i am pretty sure so the sump will be an awesome bit of kit and you will end up with a NItto pump. Not entirely sure what they are like for longevity, i guess time will tell.

Paint the car and do the engine bay when the motor lets go cause its going to happen soon enough lol I cant believe Croydon told you to pull the motor, put an oil pump and sump on it and leave the rest..... if your dead set on painting the whole car then get the motor rebuilt and do it all at once.

There is no reason that CRD should damage the engine bay, i dont recall destroying anyones freshly painted engine bays when i pulled motors on GTR's.... there is heaps of room to work with when you have done lots of them ;)

As for the sump and pump, CRD use Performance Metalcraft i am pretty sure so the sump will be an awesome bit of kit and you will end up with a NItto pump. Not entirely sure what they are like for longevity, i guess time will tell.

Ok so new plan, respray car blue as it gun metal grey at the moment, and leave the engine bay the colour it is unless masking everything up will look ok

OP, if I was in your shoes, this is what I would do.

Seeing that it's a street car ONLY, leave the engine in, put 6-6.5 litres in the sump and drive it (middle of the hump). I don't believe it's cost effective to pull the engine, sump off, pump, baffles then put it back in. You've just done a half assed job. If you're going that far you may aswell spend the little extra and give it a freshen up (IE Ring's and bearings. While you're there pistons and rods... Very easily get out of hand). We are now talking about a rebuild.

If and when the time comes, then do all the above.

Perfectly said.

Forget all this $1700 sump, $1500 oil pump business... It's just not required.

Overfill the stock sump by 1ltr, drive around fine. Sumps, extensions etc, you'll never need them at that power level and use.

Perfectly said.

Forget all this $1700 sump, $1500 oil pump business... It's just not required.

Overfill the stock sump by 1ltr, drive around fine. Sumps, extensions etc, you'll never need them at that power level and use.

Ok cheers guys really appreciate the advice and money your saving me at the moment lol!

What colour is engine bay now, I have blue Gtr and bay is black from factory .. Just curious

It's also black but it has so many scratches on it just looks horrible, guess I could re black but thought it would look nicer in blue.

post-125705-13856224438374_thumb.jpg

Not sure the photo really shows how crap it looks!

post-125705-13856226037551_thumb.jpg

And this doesn't show how faded the paint is due to the water being on it!

post-125705-1385622508991_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...