Jump to content
SAU Community

Recommended Posts

Ive got a brae hi mount manifold which pricewise is similar to 6boost but the construction and gains ive had cant be compared to cheap stuff you can buy under 1000 so I personally wouldnt go any of the cheaper stuff unless your on a budget and performance gains from it arent that much of a big deal.

Track work pushes manifolds to the limits, I would prefer the factory cast one, with factory heat shields personally, and then externally gate the turbo off the housing..

Just don't go too small for turbo housing, it will cause high egt's which no manifold will take for long... Ethanol (e85) will help with longevity.

Cheers guys... might save up and do it right the first time. Brae hi mounts? Are they as good as what people claim 6boost are??

Sure are quality is extremely high and brenton is great to deal with. Here is a pic of the inside of the collectors and dyno results of before and after manifold on my setup with only change being manifold and turbo converted to ext gate boost was at same psi

post-50426-0-70856200-1388217124_thumb.jpg.post-50426-0-20564800-1388217171_thumb.jpg

Cheers guys... might save up and do it right the first time. Brae hi mounts? Are they as good as what people claim 6boost are??

<br /><br />You are building a track car, go with the proven items. Cheaping out anywhere will punish you more than it would in a street car where you can sometimes get away with it. $1200 Is nothing
  • Like 1

<br /><br />You are building a track car, go with the proven items. Cheaping out anywhere will punish you more than it would in a street car where you can sometimes get away with it. $1200 Is nothing

Yer very true...

Also thanks for the pics. Very impressive dyno result just by changing manifold! A little shocked by it actually.

Sure are quality is extremely high and brenton is great to deal with. Here is a pic of the inside of the collectors and dyno results of before and after manifold on my setup with only change being manifold and turbo converted to ext gate boost was at same psi

attachicon.gifdyno2.JPG.attachicon.gifIMG_3108.JPG

Any pics on car mate? or just in hand?

Hi all

Been a good read so far and as I am in the process if looking for a manifold I thought I would ask a few questions.

Now I know that the 6 boost that Kyle makes are a great unit $1260 and the Brae unit $1100 + also looks the goods but there are other manifolds out there that are cheaper that also look the goods but not much in the way of feedback.

Out of interest sake has any one had experiences with

At performance manifolds

D1 stable manifolds

Sinco custom manifolds

Hybrid performance manifolds

Cheers

Edited by FJ RB25

I would just go with proven results.

We went 6 Boost split with twin gates, why risk buying something for $1000 when for $200 more you have a life time warranty that it wont crack with a brand name known to be efficent and used on many big powered builds?

Hell if you want ot save a buck, heaps of others out there, have a google and enjoy reading about welds cracking......

Pay once, do the job once and forget about it.

GTRPSI

I'm hearing what your saying an I agree,

However if everyone purchased 6 boost and that was it then where would we be besides being happy and crack free?

There are other quality products out there and I was really interested in peoples experiences with them, if they are any good etc etc

We all know 6 boost are the best

Thank you Kiwi for the info I will check out your post

Cheers

Edited by FJ RB25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...