Jump to content
SAU Community

Recommended Posts

after bit more info and feedback re: quaife rear diff on the gtr, anyone running one of these yet?

not sure if its directly swap jobbie, unlike nismo items that require half shafts etc

who here is running one?

already had great things about the front but for the rears not sure if its better than nismo 1.5 option

Link to comment
https://www.sau.com.au/forums/topic/441222-quaife-rear-diff/
Share on other sites

Hey Nesh, to have a chat with Terry at Award about rebuilding your standard diff tighter, that's the easiest and most likely cheapest way for pretty much the same result

I don't know about the rear diff but the quaife front diff is a gear résistance limo and doesn't 100% full lock which is what makes it so good for the front where you want the back it to full lock on acceleration

  • Like 1

bought front quaife diff, was chatting with owner of jjr, he swapped from nismo 1.5 to quaife rear, said difference was chalk n cheese, few other 32 gtr including donut king r35 has it in the rear, no chatter unlike nismo, maintenance free, lifetime warranty etc

has me leaning towards the quaife rear

bought front quaife diff, was chatting with owner of jjr, he swapped from nismo 1.5 to quaife rear, said difference was chalk n cheese, few other 32 gtr including donut king r35 has it in the rear, no chatter unlike nismo, maintenance free, lifetime warranty etc

has me leaning towards the quaife rear

When doing my rear I was tossing up between the quaife and the Nismo GT pro. I went the Nismo because the Quaife in the rear was just released and there was no feedback around, despite how good it was up the front.

The Nismo, on medium is way too much, I need to back it off and to get back that front drive that the quaife gave prob need to throw some extra friction plates into the transfer case. The Nismo (Atleast on medium) is one agro mofo.

How the quaife would go as a rear, it won't be a bad thing, may be super special but there isn't many people running one as they are so new.

Go drive an R34 (GTR). Nothing new there. Helical is helical.

Michael, you have both cars, you notice any difference hopping from one car to the other

the other thing to suss out is if quaife requires half shafts like the nismo or other mods

Michael, you have both cars, you notice any difference hopping from one car to the other

the other thing to suss out is if quaife requires half shafts like the nismo or other mods

Yeah, their two completely different cars to drive on the edge is stock form, as far as drive line is concerned that is, the 34 doesn't always spin both back tyres in the middle of a turn unless pushed very hard making it a bit unpredictable and then by the time you've got them spinning the front has kicked in already pulling you straight, the 32 is the oppersite, in a straight line the 34 has sooo much more initial grip, but most of that is the transfer case being preloaded in the 34

http://m.youtube.com/watch?v=WpQETVmmS7w

At 1.15mins is an example of me pushing hard enough then 5secs later me pushing a bit to hard

I haven't punted it yet with the quaife in the front fitted

I have a spare R32 diff and new R34 gearing which I'm going to but in the rebuilt 32 diff and then jam it in the 34

pretty much in the same situation as OP..

option 1: rebuilt kit for r200 (250$ + was told about 400$ to rebuilt/retight the diff) should be tighter but not overly tight as a Nismo GT. no worries about bolt-on

option 2: buy a quaife because maintenance free, less chatter, drive smoothly but would still like to know if it's bolt-on affair.

option3: Go for a carbon diff ( most likely used, seen some from 600-1000), heard they were smoother, less maintenance and drive smoother than regular metal lsd.

Well I have just purchased a quaife rear LSD.

Pretty certain it will need modification 'as early R32 cars will require the stronger later driveshaft flanges to use this' whatever that means.

correct, emailed Tim @ SVS and he confirmed using later model half shafts which are stronger as it has larger internal spine size, not a problem if your car is already late model 32 or 33/34 and non v-spec, straight bolt-on

Well I have just purchased a quaife rear LSD.

Pretty certain it will need modification 'as early R32 cars will require the stronger later driveshaft flanges to use this' whatever that means.

Yes I just picked one up too... so I got the front and rear! In a R33 GTR however.

nice. When you did the front one how did that compare to standard setup?

The front one is right next to my foot still under my desk at work soon to be joined by the rear one! Slow build man, you will find out before me fortunately for you...

I think we got the last ones before the price rise too! :)

The front one is right next to my foot still under my desk at work soon to be joined by the rear one! Slow build man, you will find out before me fortunately for you...

I think we got the last ones before the price rise too! :)

Lol I know that feeling having performance parts under the desk.

Yeah, that is BS re: price rise.

I really don't want to fork out almost $2K just for a diff when they are being sold for almost half that price in the states.

http://www.frsport.com/Quaife-QDF3L-ATB-Differential-Nissan-Skyline-GTR-R33-R34-front_p_29114.html

Just waiting upon some more diff bushes and new diff bearings and then will get it installed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...