Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Yeah cheers guys.. One opinion I've been given is 24psi.. But I don't see how that could be the case as long as the spring tension etc is right and you aren't revving it stupidly high you shouldn't get any valve float (which seems to be the issue with these heads throwing shims),

Also I could probably find it somewhere but does anyone know what the biggest cams you can go without losing the vct

Edited by Huzqld

Yeah cheers guys.. One opinion I've been given is 24psi.. But I don't see how that could be the case as long as the spring tension etc is right and you aren't revving it stupidly high you shouldn't get any valve float (which seems to be the issue with these heads throwing shims),

Also I could probably find it somewhere but does anyone know what the biggest cams you can go without losing the vct

Poncams but why are you doing cams anyway? Usually a lot of other priorities for the dollar.
  • 2 weeks later...
  • 5 months later...

Hey guys I have gone ahead with this neo30 build. Instead of starting a new thread I'll just ask in this one.

Have just setup the timing belt with one idler and a tensioner (one above water pump). All the marks line up pretty well. Is it worth while getting an Adjustable cam-gear for the exhaust side?

I'll be keeping VCT so guessing I dont need anything for inlet side

(Standard cams to start with)

Cheers

Ian

Edited by Huzqld

Hey guys I have gone ahead with this neo30 build. Instead of starting a new thread I'll just ask in this one.

Have just setup the timing belt with one idler and a tensioner (one above water pump). All the marks line up pretty well. Is it worth while getting an Adjustable cam-gear for the exhaust side?

I'll be keeping VCT so guessing I dont need anything for inlet side

(Standard cams to start with)

Cheers

Ian

I have a spare VCT ring (good for dialing in cams on 30's) for the intake side if you would like to purchase. Apparently they have about 4 deg of movement.

  • 2 weeks later...

If it was me id do 260 type b poncams/ neo head/Precision 6466 T4 /e85, comp in the low 9's

the only trans that won't explode would be a glide or a Th400.

thats a combo id sell to a customer wanting the best of both worlds

Id prefer a neo head over a 26 head as it would come up quicker on a torque converter due to inlet manifold design

and i bet it would make more power under the curve making it a better street proposition

its a better street deal all round

Need to run into the 8s to even start to justify a 26 head

cheers

darren

Cheers Darren

I've already got the 35/40 from my sohc setup (it's a VL) and a re401a auto. I Got the manifold with a heap of parts and it has t3 flange so later I'll upgrade the turbo and manifold or just get flange changed. I plan on putting some type b poncams in it but would just like to see the difference from std cams.

Close to 9:1 comp

Specs of motor

Spool I beams

Wiseco pistons

Asr 8.5l sump

Arp main and head studs

N1 oil pump with billet gears and crank collar

Cpc plenum

Steam pipe manifold

Standard head besides springs and retainers

Ross balancer

Ian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...