Jump to content
SAU Community

Recommended Posts

Has anyone else had an issue with the fan eating away at their shroud when using a Koyo radiator with stock shroud?

Mine seems to do it at high speed when the air pushes on the radiator just enough so that the shroud connects with the fan.

Never used to do it until I installed N1 engine mounts and happens only above 200km/hr. I thought I had fixed the issue by cable ties on the top uprights of the radiator to the rad support which worked fine which seemed to work ok but it began munching the shroud again at Racewars at speeds above 250km/hr

Pic below of the damage, it's not bad just don't want it to happen with my new shroud/fan

2014-03-24%2018.34.20_zps7qqqs9la.jpg

If you watch some old BMI videos you see the Japs carefully cut out the the flat area of the shroud to prevent the fan from making contact...

Let me find a still/photo and show you what I mean.

** edit can't find on google images, and going cross eyed looking lol

If you watch some old BMI videos you see the Japs carefully cut out the the flat area of the shroud to prevent the fan from making contact...

Let me find a still/photo and show you what I mean.

** edit can't find on google images, and going cross eyed looking lol

I'm trying to get away with no cutting the fan or shroud on the new one

don't cut the fan at all, a little bit of unbalance on the fan and you pput heaps of pressure on ur water pump as its connected to the fan. my fan had the edges cut and broke my water pump into 9458-239840-3492 pieces at like 7000 rpm

  • 1 year later...

Update on this, I tried several things including solid mounting the top radiator mounts, getting a new fan, getting a new shroud... All to no effective result and it kept just eating away at the shroud.

Seems to be an issue when you have a Koyo radiator with a stock fan/shroud and Nismo engine mounts.

I've ended up buying a Gktech fan (plus adaptor) and another new shroud and it doesn't hit at all, actually has a reasonable amount of clearance. The Gktech fan doesn't work as well as the OEM Nissan one but still is able to keep my temps in the low 80's in traffic. No issues while on track at all as the airflow is more than effective.

Thought I would post because I'm sure others will have the same issue in the future!

  • Like 4

thanks for the update. I have the koyo, but it is not installed as of yet. I will likely fiberglass a part in at the shroud and trim it out where yours touched.

Update on this, I tried several things including solid mounting the top radiator mounts, getting a new fan, getting a new shroud... All to no effective result and it kept just eating away at the shroud.

Seems to be an issue when you have a Koyo radiator with a stock fan/shroud and Nismo engine mounts.

I've ended up buying a Gktech fan (plus adaptor) and another new shroud and it doesn't hit at all, actually has a reasonable amount of clearance. The Gktech fan doesn't work as well as the OEM Nissan one but still is able to keep my temps in the low 80's in traffic. No issues while on track at all as the airflow is more than effective.

Thought I would post because I'm sure others will have the same issue in the future!

Keep an eye on the GKtech fan; I ran one for a while and found that whilst it could control temps ok for a short while, temp would slowly rise in traffic until reached a point where it could no longer control, and temp would spike from high 80 to over 100 degrees in a very short time. This was whilst using a 3 core 50mm rad, and a brand new OEM fan clutch.

Back to an OEM fan, with nothing else changed and the car would never go over 86 degrees in any scenario

I know Mat Wooten (GeeTeeTee) had a very similar experience to mine with the GKtech fan.

It also sounded like a low flying aircraft all the time which drove me mad.

I had good success with a heat gun and a wooden roller on the shroud to push back the offending area that was fouling the fan under deceleration (engine mounts on the VQ are quite soft).

Just keep a wet rag handy to cool the area your working on as the shroud can sag or go brittle if you overheat it.

Keep an eye on the GKtech fan; I ran one for a while and found that whilst it could control temps ok for a short while, temp would slowly rise in traffic until reached a point where it could no longer control, and temp would spike from high 80 to over 100 degrees in a very short time. This was whilst using a 3 core 50mm rad, and a brand new OEM fan clutch.

I have done 3 sprint events and 2 track days with no issues. It's not a "traffic" driven car but I have been keeping a close eye on the temps. While the OEM fan kept the temp at thermostat temp at all times in traffic the GKtech rises to the point where the clutch fan kicks in and then stays steady there.

Even when idling in pits after belting the shit out of it on track I have not seen it go above 90deg

  • Like 1

I have done 3 sprint events and 2 track days with no issues. It's not a "traffic" driven car but I have been keeping a close eye on the temps. While the OEM fan kept the temp at thermostat temp at all times in traffic the GKtech rises to the point where the clutch fan kicks in and then stays steady there.

Even when idling in pits after belting the shit out of it on track I have not seen it go above 90deg

That's a win then!

I like their products, but the fan does seem a little hit & miss on anything other than SR's.

If it works in your application; you can't argue, and the price is right too.

I had the same problem with a Ron Davis radiator, my fan caught the shroud and jammed while I was on track, at the time I only had my factory dash in there instead of my Racepak IQ3 so I didn't have any warning lights for temps, I didn't realise there was an issue until the Link G4+ put the car into limp mode when the water and oil temps went through the roof.

I've now gone to twin electric fans

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...