Jump to content
SAU Community

Recommended Posts

IN REGARDS TO PASSENGER AGE:

Passengers must not be under the age of 15 years. All under 18 year old passengers must sign a passenger indemnity on the day and must have approval from their parent or guardian. If the parent or guardian is not present at the event, a letter giving permission to participate must be received

Thanks for clarifying!

I would go 1 further then that and make ALL passengers sign the indemnity form and for 15-18 year olds have the parent or guardian sign the indemnity form as well, maybe post a PDF with the form to fill out and sign before hand if the parent/guardian can't make it on the day, it is just not worth the trouble should ( heaven forbid ) something goes a miss

We already do this, it's just the new minimum age that we've been made aware of due to insurance.

seeings im lazy and sometimes CBF, but last minute, when is latest i can enter? on the day? is it full? i also havent read the last 3 pages.

LOL

There are still spots available, when it is full we will post it up.

The Eventbrite ticket sales end on 8th June at 10:30pm. Whilst we would prefer that you enter beforehand, on the day entries will be accepted, as long as there are still spots available. So if you haven't bought a ticket before hand, then cash on the day will be accepted. Also make sure you have your Motorsport license and other requirements available for inspection on the day.

OK sweet!

thanks Mr President. I'll try and get to around to paying before the 8th.

no ideas about my members card but got all my CAMS and log book stuff with the race car.

now to see if the wifer will give me permission

These are the guidelines sent to us by the insurance company, I am posting it up so that everybody is aware of what they are.

Motorkhana

Motorkhana is a fabulous low cost way to get involved in motorsport. To get involved in Motorkhana you can get your first taste of motor sport in your standard road car, but this discipline also caters to the most skilled and experienced of drivers in highly modified or purpose built Motorkhana specials.

The competition is designed to test the acceleration, braking and manoeuvrability of a vehicle and the skill and judgement of the crew members.

A motorkhana may be conducted on a sealed or unsealed surface and involves manoeuvring through tight and twisty tests marked by flags.

Cars will be started individually and there will be one car on course at one time.

At no time during these events are burnouts, skids or drifting permitted to take place.

At no time during these events are burnouts, skids or drifting permitted to take place.

So SAU NSW is like the Western Sydney Wanderers of car clubs? Not that you can really trust a motoring description that uses the word "fabulous"!

No linking of drift corners. Thats half of what the texi is lol. I say we try out an unsealed surface next ;) It used to be just no stand still burnouts. will be interesting to see who 'bends' the no smoke show rule :P

I think these rules are probably to cover off circuit-drifting which is high-speed stuff. It's not like there are any walls to smash into or curbs to roll the car over on... but if a claim needed to be made and someone had footage of the incident and there was smoke involved, then I suppose legally they could reject the claim.

Just like the noise rules, these are not imposed by the club they are imposed on us as part of hiring the venue or insuring the event. In fact AASA said they didn't insure any burnout events, full stop.

I suppose if people want to do that then they need to do it at power cruise or summer nats.

Still lots of fun to run courses for time and handbrake turn around some cones.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
    • Yuh, My new R34 box is sitting on the workshop floor (in its large shipping box, which is a nice thing on its own), along with a front plate to convert to push clutch. There was no way I was interested in rebuilding my existing one. Was only partly interested in the risk of buying a used one. But, if you want a 2nd hander, I can point you to one in/near Melbourne at least. @Komdotkom has one that should be in good enough condition to be usable. I don't think it's in a for sale thread, you'd have to message him. @redzedhas one that definitely needs a rebuild.
×
×
  • Create New...