Jump to content
SAU Community

Recommended Posts

GTTR34 is selling some BBS rims (17x8, 17x9) for a good price. I'm just wondering if they'd fit on my GTS-t without modification to the body?

My car's currently got the stock rims and is lowered 320 front and 335 rear (yeah it's stupidly low), will they fit if I got some different springs etc...?

Link to comment
https://www.sau.com.au/forums/topic/44296-how-wide-can-i-go-r32-gts-t/
Share on other sites

With a front ride height of 315mm (...well it looked cool that low :Oops: ) i was able to fit 17 x 8 +30s on the front, and with a rear ride height of 340mm able to fit the same size wheel again.

The rims had 235/45/17s on them and on the front upper control arm, there was evidence that the rubber had occassionally rubbed on the control arm.

It looked as though the rim was clearing everything and the wheel didnt stick out past the guard, actually looking at how the rim sat in the guard, it looked better fit then the usual 17 x 7 +30 i run on the front. So with a 225 or 215 tyre it would have fitted and cleared everything, but a slightly different offset would have even the 235 tyre clearign everything. :cheers:

As for the rear, i think a 17 x 9 would go.... chase down the offsets, you may get lucky ;)

17x8 + 36

17x9 + 35

makes no sense to me...

thanks guys for the input so far.

Going by my car, id say the fronts will need a spacer, (with 8s on the front i think an offset between 25-30 will work

And the rears will go close as well, perhaps an offset of around 28-30 would work best with 9" rims

I just bought a new set of rims for my car, they were off a GTR with 17 x 8 +35 all round. I dont like my chances being a great fit, but as i have4 had my car raised and they will be for trashing aorund tracks, im not really too concerened if they stick out a little...worst case if they rub susp ill use spacers

I've just fitted 17x8 + 30 with 215-45 on the front. The car has 315mm centre to guard on the front. Sits just inside the guard with no scrub. With the +36s on the front the rims should sit further in than mine would and so you could probably fit a wider tyre without hitting the guard or needing it lipped. You may have some clearance issues in board though on your suspension upper arms or springs.

I have trial fitted the rears without tyres and jacked them up to where they would normally sit. They are a 17x9 +35, same as what you are looking at. They sit just inside the guard and there is about 10mm clearance at the back of the rim to the hicas steering arm ball joint. The rear guards will definately need lipping before the wheels will fit without scrubbing.

Yep, r32 gtst.

Had a bit of a spirited drive last night. There is a bit of scrubbing of the plastic liner if you are cornering hard and hit a big bump but i can live with that. Doesn't help that i'm running a bit of castor too, i think it's 8 degrees.

i have 18X8.5 front and rear with 225/40 streached over them so they dont hit the guards, i dont know the offset, but my guards have not been rolled.

these things JUST fit without hitting anything.

Bbenny i am pretty sold on 18x7.5 rims do u think an extra inch makes a huge difference. i am planning on running 225/40's as well... i have the same car as you. is your suspension fairly hard (coilovers?), do you just have the right offset, small enough tyres or the combination of all three that lets u run 8.5 inches all round. thanks heaps...

mic

hey mic i would say its a combination of all 3, i do have stiff coilovers, but it wouldnt matter if i had sponges in there because the offset is perfect so nothing can touch.

I think the 7.5 will be sweet, because i still have to stretch the 225/40 over my rim to ensure it doesnt rub the guard, i could prob go a slightly wider tyre, but not much, so go the 7.5 with the 225 and it will be sweet.

maybe even consider 17" if you plan on track or drag, but 18" does look the best :(

  • 2 weeks later...
  • 10 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...