Jump to content
SAU Community

Recommended Posts

I was wondering if anyone has used a stock Series 2 ecu in a series 1 R34GTT.

I have a series 1 R34GTT manual and want to install a series 2 ECU.

I know there was a torque increase in Series 2's and a few other changes, so I am wondering if the ECU was different as a result.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/443530-r34-gtt-series-1-v-series-2-ecu/
Share on other sites

I have a Nistuned GTT ecu that's already been tuned for Air filter/interfcooler/exhaust and 12psi for sale for $400

For example you're better off buying something like that and then getting your afr checked on a dyno or even a touch up tune.

I really can't see any benefit in trying to chase a particular series ecu for little to no gains when you can have the car setup perfectly for its current time real world condition.

Reason i ask is because i currently have an impul ecu which is tuned for jap fuel i think. I bought a series 2 ecu to put in my car to avoid any issues driving using 98ron. I have however bought a series 2 ecu and wanted to check that it will work ok in a series 1 before i install it. Definitely didnt get it for the power increase in series 2. Just wanted to make sure it was compatible. Fron what i read the extra power in series 2 comes from revised cam shafts, and wanted to see if the ecu was revised to accomodate the cams. Cheers

Just letting you know from what I've found the s2 manual models have a different exhaust cam, compressor wheel and compressor housing compered to the auto s2 and all s1 models.

Would the different exhaust cam mean a different map in the ECU? Would this ECU still be ok for a Series 1, or is the tune very different?

Edited by Bugzs15

Most likely. Not sure if it will be ok for a series 1 and I don't know how different the tune is.

I recommend you get a tuneable ECU and tune it or pick the ECU that your engine came with from the factory if the car is stockish just for peace of mind.

ECU partnumbers:

http://webbersrbguide.com/index.php?option=com_content&view=article&id=58:rb-ecu-part-numbers&catid=45:wiring-electrical-a-ecu&Itemid=23

ok, so i looked at My copy of nistune in relation to r34 ecu's as I was curious.

There are approx 6 different image files, and this is the biggst difference i could find quickly comparing them. Alot were identical.

The timing maps had a copule of spots with 1 or 2 degrees different, wouldnt matter at all.

this snip is comparing 2 fuel maps.

i would call them the same....

post-107339-0-54816600-1400826962_thumb.png

you can download nistune as a trial, load them up into the main and comp slot, then click the magnifying glass to compare.

Thanks very much for confirming everyone, looks like it will be good to use.

Hope this post helps anyone else with similar question in the future as a lot of ecu questions relate to R33, but not many for R34.

Just letting you know from what I've found the s2 manual models have a different exhaust cam, compressor wheel and compressor housing compered to the auto s2 and all s1 models.

I'd love to see some hard evidence that manual and auto have different exhaust cams and different turbos.

Series 1 are obviously different from Series 2. (compressor wheel from memory)

Edited by wolverine
  • Like 1

This is what I have found.

Exhaust cam on Nissan fast

August 2000 or newer (Manual only)

13020-AB000-

All other RB25DET Neo

13020-AA020-

Turbos on Nissan fast

August 2000 or newer (Manual only)

14411-AB000-

May 1998 to July 2000

14411-AA100-

July 2000 to August 2000

14411-AA110-

August 2000 or newer (Auto only)

14411-AA110-

Alternate part number for 14411-AA100- is 14411-AA110-

Also found

http://2style.net/r34sedan/hikaku/hikaku02.htm

http://www.skylinesaustralia.com/forums/topic/69089-differences-between-r34-and-r33-turbo/#entry1527454

post-85181-0-45023400-1400904673_thumb.png

post-85181-0-14368500-1400904674_thumb.png

post-85181-0-90195100-1400904674_thumb.png

post-85181-0-91357400-1400904675_thumb.png

post-85181-0-84200600-1400904676_thumb.png

Edited by H4x

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...