Jump to content
SAU Community

Recommended Posts

Thanks guys I just don't want to spend an arm and leg on this build with brand new parts

I don't like the idea of the ceramic ball bearing set up in the precision turbos is there a equivalent to the 6262?

I will be starting with 98 pump fuel then maybe changing to e85 down the track

Link to comment
https://www.sau.com.au/forums/topic/445045-t04z-on-rb26/#findComment-7325892
Share on other sites

Can I ask what you don't like about the ceramic ball bearings mate? :)

Could always run a JB version of it?

If I was you go straight on the E85 will save you money in the long run paying for 2 tunes and the performance gains of ethanol are EVERYWHERE off and on boost! It will hose a dirty petrol setup from idle to redline :D

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/445045-t04z-on-rb26/#findComment-7325946
Share on other sites

Never heard of that. Not saying it ain't true, but those sorts of issues become pretty well known damn quickly. What's "heavy loads"?

http://www.turbodirect.co.za/site/index.php?option=com_content&view=article&id=778:inside-a-precision-6262-turbocharger&catid=26:beware-before-you-buy&Itemid=21

Have a read guys might interest a few ppl just want to know if this really does happen?

Link to comment
https://www.sau.com.au/forums/topic/445045-t04z-on-rb26/#findComment-7326137
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I refer you to this thread on PF, by someone who knows what he's doing. Paints a good picture of the humble AD09.
    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
×
×
  • Create New...