Jump to content
SAU Community

Recommended Posts

Hey I've been having random starting issues and after it finally showed a diagnosis code I removed the cas - and I found the the exhaust cam bolts have rubbed against the cas! Am I missing a gasket or something to give it more room?

I would have hoped the mechanic would have noticed when they were adjusted!

post-32397-0-58687600-1406294427_thumb.jpg

post-32397-0-35337900-1406294626_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/446065-adjustable-cam-destroyed-cas-wtf/
Share on other sites

Well when I got it back from the tuner it had new bolts on the cas - so I'm thinking they replaced the original and didn't put washers back on!

I think I will be having words with them....

  • Like 1

Wow.

And looking at it it appears to be set to zero. Bit hard to see in the photo though.

I think it has a small adjustment.

I've put it all together and it still won't start - the injectors ticked when the cas was spun, and there's spark in the plugs - so fuel problem?? Or would the replacement cas put the timing too far out to start it????

Piggaz is on the money. No washers inside that rubber gasket causes the cas to get too close to the cam gear. It doesn't look like there is any of the washers inside that gasket in the pics.

Edited by Chris32R

R32-25t - I think that mark is where a washer used to be as the gasket is pretty hammered!

double check that the input shaft for the cas hasn't snapped off

double check that the input shaft for the cas hasn't snapped off

Yeah the input shaft locator is broken off in the cas - so I'm trying to line up the new cas into the shaft, but it's bloody hard!

AF53B8B7-3F5C-424D-9AB8-F0DFBBF75FC8.png that's a washer, you can see the outline of it clearly

Ah I can see what you mean now I'm at the car - there is a small washer inbuilt into the gasket on the cam cover - if this is all that's needed I'm confused how the cas was touching the cam bolts....

can happen if the wrong washers are in there (not thick enough) but hard to say just from the pic. They look right, but you might be best off doing some measurements I think. Measure the thickness of the washers, etc. If you can source another CAS (cheap second hand one might be best) and put it in the car then turn it over by hand slowly and listen to see if it rubs it might tell you a bit more. I'd order a new seal and washers, not that expensive.Then see if it still hits

I've now replaced the cas - as it was scored on the inside.

I have got the car briefly running with it all together - and I think it is clearing fine as no marks are on the new cas so the gasket with washes included must be fine.

On reflection, ages ago I had the car running without the cam cover for a short drive, and didn't hear / see it rubbing, but I guess it must have been - a lot of damage with only 10mins of running!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...