Jump to content
SAU Community

Recommended Posts

It is a GTR yeah ?

You are turning in a little early and getting on the power a little late, get to know your ATTESA and trust the 4WD to pull you clear of the corner

It also looks/sounds like your single pegging, get the LSD looked at

And for the love of god DO NOT CROSS your arms :no:

Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7367983
Share on other sites

It is a GTR yeah ?

You are turning in a little early and getting on the power a little late, get to know your ATTESA and trust the 4WD to pull you clear of the corner

It also looks/sounds like your single pegging, get the LSD looked at

And for the love of god DO NOT CROSS your arms :no:

Its a GTS4 with a 26 in it so pretty much - I'm the guy that bought your brembos - stockies caught fire the session after that video

good call on the cornering, definitely got to build confidence now that i have some real brakes

Also with regard to crossing arms - i hear differing feedback on this - why not cross?

Edited by LuckyTune
Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7367989
Share on other sites

I'm also having trouble on the track and might upload one of my vids tonight. I find it really hard to keep corner speed up and the car seems laggy as I exit the turn.

Most of the time I have cars with 100+ less kw pull away from me out of a tight corner. If I try to exit any harder the car just under steers.

Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7367991
Share on other sites

Its a GTS4 with a 26 in it so pretty much - I'm the guy that bought your brembos - stockies caught fire the session after that video

good call on the cornering, definitely got to build confidence now that i have some real brakes

Also with regard to crossing arms - i hear differing feedback on this - why not cross?

Oh yeah, hello

How did you go fitting them ?

I have since removed the Nismo Brembos and fitted some AP 6 pistons :)

If the car gets way out of shape mid corner your arms are tangled, read the corner and set your hands before entry and prepare for/expect it to go wrong and hope it doesn't

I have a bad habit of driving one handed lol, I have a video of me punting me 34 around Wakefield power sliding it out of the last corner and I look like I'm a Sunday drive hmmm

What LSD does it have ?

I have Whiteline sway bars in my 32 and cusco in the 34, go the adjustable white lines :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7368029
Share on other sites

clamped the hubs up lice crazy, linished a rod down to the right size to centre it all before drilling and still managed to get off centre holes haha.

All bolted up sweet though

10303468_10151983409096710_3973187679836

yet to see how it holds up on the track but I'm hoping i will at least get a full day!

haha i wish i had the coin to go all out on mine - one day.

stock diff as far as i know, was going to shim it because i need to replace my attesa pump so its got to come out anyway

Just ordered a front and rear whiteline kit - should make a difference

Edited by LuckyTune
Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7368040
Share on other sites

If the car gets way out of shape mid corner your arms are tangled, read the corner and set your hands before entry and prepare for/expect it to go wrong and hope it doesn't

I rather strongly disagree with that statement :) Taking your hands off the wheel means that if it gets away from you mid corner and the wheel spins in your hands you have less of a hope of knowing where straight ahead is. Of course on the tight slow stuff there is always a compromise....but persoally I ama BIG believer in never taking your hands off the 3-9 positions on the wheel

Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7368121
Share on other sites

i'll definitely take the hands advice onboard.

that was with r888's - best lap i got was a 44.something - but as mentioned before it was with almost no brakes (they let go and caught fire leaving zero pedal at the end of the straight, tested the run off)

Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7368311
Share on other sites

Lol, Murphy's law :)

Those brakes as a set held up a few full days hauling up my 300kw R34 which weighs a hefty 1661kg + my fat arse, your nice lite 32 will be like retirement for them lol

Michael, got a dyno sheet, what's your mod list ?

-7's on E85, 325rwkw @20psi. I'm guessing there is something wrong though as I only saw 15psi on the weekend but the car still seems to go hard. It's just lagy is all.

http://i.imgur.com/M2jmBoJ.jpg

Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7368394
Share on other sites

Crossing your arms is not only perfectly fine, it's better than repositioning your hands on the wheel. Keeping your hands in position means you know exactly where the wheel is, and you're in a better position to make any corrections needed. There's no situation in that video that requires your hands to be repositioned before the corner. Only when you need about a full turn of lock would you reposition your grip before a corner. Pretty rare on a race track, even a tight low speed course like that. Mt Cotton Hillclimb's hairpin is about the only corner I ever need to do that for, and when I do it I end up with my right hand crossed back over to about 9 o'clock so you're ready to wind lock off if/when needed.

All the pros cross their arms, and keep at least one hand in position unless absolutely required.

Link to comment
https://www.sau.com.au/forums/topic/446971-track-pointers/#findComment-7368466
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...