Jump to content
SAU Community

S A U - N S W Spring Tech Arvo Saturday 8Th Nov 1Pm


Recommended Posts

SAU.NSW officially thanks Andy Spira of MotorActive and Peter O’Connor of DBA for hosting this wonderful event about lubricants and brakes


Topic: Liqui Moly Oils and Additives, and DBA Brakes


Day/Date: Saturday 8th November 2014


Time: From 1pm to approx 4pm


Address: MotorActive, Unit 35, Slough Business Park, Holker St, Silverwater




Parking: There is plenty of parking available


Food and Drink: Snacks and drinks will be provided


Cost is Free for Members - although non-members still have time to apply and pay


Limit of members who can attend is: 40, with a minimum of 20.


This tech arvo is going to be in two parts. One part will be on lubricants and additives including their effectiveness for both road and race applications. The second part will be with DBA on performance brake rotors, their make up, and how they perform in both road and race applications. Should be a very informative afternoon!


*** All advice and demonstrations given by workshops, professional practices and factories for SAU.NSW Tech Nights are the responsibility (of accuracy) of the establishments - not the car club.

post-91912-0-80225100-1410343305_thumb.png

  • Like 1

Attendees:
1). MrFijiGold
2). Terry_GT-R34
3). Victory
4). Clinton
5). Pezhead
6). Edifier
7). Redline_GTR
8). sammi_d
9). crashdown
10). stagea pete
11). levinboy
12). Aggroman
13). luke gtr
14). Rob260
15). RiseofBrutality
16). kila32
17). MrStabby
18). God_speed
19). MR33YO
20). GOD12A
21). Daleo
22). Aqua
23). peterj
24). Liz
25). Watchamacallit
26). benm
27). JoelyMoley
28). nick_7g
29). GoldZilla
30). 533 RYC
31). vorse
32). ls128
33). klebestift
34).
35).
36).
37).
38).
39).
40). DekA

  • Like 1



  • Similar Content

  • Latest Posts

    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
    • Haha I just finished the last season of TPB: Jail last month. I'm happy they're still pumping out episodes. 
×
×
  • Create New...