Jump to content
SAU Community

Recommended Posts

WELL HERE WE GO....

Bought GTR

After 3 months Motor went Bang, cracking pistons, shattering valves, it did a really good job.

Fully rebuilt engine, decided to leave standard turbos because yolo (just for the run in stage, kesh was low)

On the way home from Full rebuild running the engine in and not boosting it i spat exhaust wheel of one of my turbos out my exhaust.

post-92069-0-51748500-1395011191_thumb.jpg

Got new turbos

AFM died on the way home.

finished run in

TPS died on the dyno

Fixed TPS

Split a rad hose

Fixed hose

ran for a while

Lost half my oil

Fixed everything again all is running better than ever!!!

until.

Got shit fuel two weeks ago and was misfiring on 14psi...

Cracked the shits, Haltech, no AFM, and E85

what will go next?

#GTRlife

Bought and installed brand new sard 540cc twin spray injectors, came in as a kit specifically for rb25, they are white

Engine ran rough, also sounded like Wrx throughout the entire rev range

Tried trouble shooting think one may be faulty, bought a spare injector and still the same

New owner put it into a 2jz aristo, punched the numbers in ecu, fired up, all silky smooth... They're a waste of time on skylines but fine on toyotas

Sard 550 reds were good in my old car

WELL HERE WE GO....

Bought GTR

After 3 months Motor went Bang, cracking pistons, shattering valves, it did a really good job.

Fully rebuilt engine, decided to leave standard turbos because yolo (just for the run in stage, kesh was low)

On the way home from Full rebuild running the engine in and not boosting it i spat exhaust wheel of one of my turbos out my exhaust.

Got new turbos

AFM died on the way home.

finished run in

TPS died on the dyno

Fixed TPS

Split a rad hose

Fixed hose

ran for a while

Lost half my oil

Fixed everything again all is running better than ever!!!

until.

Got shit fuel two weeks ago and was misfiring on 14psi...

Cracked the shits, Haltech, no AFM, and E85

what will go next?

#GTRlife

Hi Anthony

Made my eyes water :(

Seems I need to post a TLDR version here.

Will maybe write it out if I can remember it all

Had car for 7 years

is a daily (lol)

Done 27,000kms total in 7 years

This car is on

its 2nd chassis

its 5th engine (and third rebuild)

its 9th fuel pump

its 2nd diff (and set of axles!)

its 3rd set of suspension

its 4th? transmission

its 3rd ECU

its 3rd turbo

its 3rd (sort of) manifold

its 3rd fuel tank

its 4th set of tyres (in 27,000kms?)

its 3rd set of brakes (as in set of front calipers, discs)

its 3rd exhaust

as you can imagine, the non TLDR version of this is very long

..and still going

  • Like 4

Holy Shit !

Hope you like working 3 jobs. :3some: to pay for this lot?

I take it you also track the car or you would be in jail by now going through that lot on the road :woot: or do you run sly grog :pirate:

Is it still your DD, got some pics?

Seems I need to post a TLDR version here.

Will maybe write it out if I can remember it all

Had car for 7 years

is a daily (lol)

Done 27,000kms total in 7 years

This car is on

its 2nd chassis

its 5th engine (and third rebuild)

its 9th fuel pump

its 2nd diff (and set of axles!)

its 3rd set of suspension

its 4th? transmission

its 3rd ECU

its 3rd turbo

its 3rd (sort of) manifold

its 3rd fuel tank

its 4th set of tyres (in 27,000kms?)

its 3rd set of brakes (as in set of front calipers, discs)

its 3rd exhaust

as you can imagine, the non TLDR version of this is very long

..and still going

Wow Greg that is true dedication! Out curiosity, have you worked out total cost of ownership ($ per km)? I've got mine for this and the previous car and they ain't pretty...

Holy Shit !

Hope you like working 3 jobs. :3some: to pay for this lot?

I take it you also track the car or you would be in jail by now going through that lot on the road :woot: or do you run sly grog :pirate:

Is it still your DD, got some pics?

All the kms done were cruising kms below the speed limit, off boost. Well not all, but relative to most people on SAU I really do drive like a grandpa.

I'd like to take it to the track one day, but the car has never been working.

It is currently sitting at an engine builder shop, with the engine entirely dis-assembled.

As for $ per KM, it's certainly somewhere around $2

All the kms done were cruising kms below the speed limit, off boost. Well not all, but relative to most people on SAU I really do drive like a grandpa.

I'd like to take it to the track one day, but the car has never been working.

It is currently sitting at an engine builder shop, with the engine entirely dis-assembled.

As for $ per KM, it's certainly somewhere around $2

$2 a KM , haha that would stop you going to the shop for an ice cream :woot:

If what you say is true (bullshit I think) I would change mechanics , maybe you are using a carpet layer to do this work for you or :pirate: ,LOL

  • 3 weeks later...

But you have more money than sense:)

How come you have not got it right by now, 5 motors???

If mine is not as I want it , I will be sooooo pissed off :(

But I am sure it will be and then some :)

  • 2 weeks later...

I'd like to put in my $0.02c and suggest.. the f**king silver dash. I mean seriously. Half the interior photos and sale threads et al have it, and it's infuriating. My car is also tarred with this.

Why yes, I did let my kindergartener suggest and paint my interior!

...

As for $ per KM, it's certainly somewhere around $2

I'm currently sitting at $10 per KM hahahahahaha]

When this build is done I will be around $27 PK , only because I have not done a shit load of Klms

Whoa!

Ok so the Skyline's sitting at around $1.25/km and the Monaro was $1.90/km, all inclusive.

It doesn't sound that bad until you consider that at $2/km:

  • Melbourne to airport return costs $100 (50km)
  • Melbourne to Geelong return costs $300 (150km)
  • Melbourne to Sydney one way is $1,760 (880km)

Oh well, cars. But ouch.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...