Jump to content
SAU Community

Recommended Posts

Hi I'm installing a Bee*R in my auto r34 GTT and I need some help finding the correct wires to splice into. I've found pin diagrams but I'm not sure which is which and there are multiple for some. Could anyone confirm where which wire goes?

Any help would be greatly appreciated !

Black Ground 25 or 32?

Yellow crank angle sensor 1° 46

Green crank angle sensor 120° 44 or 45 ?

Red 12v power supply 67 or 72 or 80?

Here's photos of where the wires need to go

Here's pics of the pin diagram for auto r34 gtt's

post-135000-0-12747300-1414832830_thumb.jpgpost-135000-0-47370400-1414832869_thumb.jpgpost-135000-0-96711000-1414832892_thumb.jpg

Yeah I know I've read a lot of bad stuff but also know people who have them on for years and no damage. I have a warranty for my car so if something does go bang it won't f**k me too hard

Oh alright then. Well if you have anymore info on how the ecu prevents excess fuel from going into the exhaust feel free to share as I'm curious as to how it does this. And possibly the tachometer may be wrong, I'll test it out next time and see !

Oh alright thank you. Well the revlimiter has a 6500 rpm setting I could set it too for road use which will shut off ignition before the stock ecu shuts off the fuel. Also cheers for the info as I was planning on setting it to 7000 rpm. Also if you guys know how many rpm should it be set to for launch control without getting too much wheelspin ? I'm thinking between 3000-3500 ?

Yeah I know I've read a lot of bad stuff but also know people who have them on for years and no damage. I have a warranty for my car so if something does go bang it won't f**k me too hard

id hate to tell you but if you were to fit this the warranty wouldn't be worth the paper it is written on.

But if you still want it fitted and are unsure of how to do so, I suggest having a professional fit it

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...