Jump to content
SAU Community

Duncan's Race Car - The Most Overdue Build Thread On Sau


Recommended Posts

Well this is a thread I should have started long ago, although in my defence this build started about 6 years before this Build section was created.

Basically this thread will cover some history from when I imported and picked the car up from Powerplay Imports in 2003

build01.jpg

Up to it's most recent event, Targa High Country which was 2 weeks ago.

build02.jpg

And from here there is a fair bit planned over the next few months which is the reason I figured it was time to pull my finger out and start this thread :)

  • Like 8

First up, how did I end up with a race car?

Well my first Nissan was a mighty 200b. I was a typical idiot p plater and luckily survived the experience. Here is me and a mate (who is now a doctor of rocket science) pushing it out of the kitty litter at Bathurst early one morning.

build03.jpg

The datto was awesome and unbreakable (at least, not on a permanent basis). I owned it again years later when I ran it as a motorkhana car, not sure where it is now.

From there I bought an s14 but within 12 months it became the "missin Nissan", taking itself on a 6 year holiday to queensland courtesy of a bikie gang. I did get a call from the cops years later asking me to come and get my car, but I let the insurance company keep it since they had paid me out 6 years earlier.... we did a lot of touring that year collecting "Big Things" pics....here it is with a big chicken.

build04.jpg

With the 200sx paid out I had to choose between an S15 and a Skyline, and made the fateful decision to buy HuGE 001 from Powerplay in 1999. Skylines weren't really that common back then and we paid over 40k for it....goes to show how depreciation works!

build05.jpg

The car was awesome, did it's first track day with the Honda Car Club at a GOHCCDTD in October 2001....where incidentally we met a lunatic called Pete Carruthers....It was the first of very many track days for that car which it ran pretty much faultlessly for the next 5 years

After a few track days I decided I wanted to step up and leased a drive for door to door racing in the Mo Pro cup...in nothing less than a Daewoo Lanos. I was the driver the racing world had been waiting for, and proved it by ending my first race in March 02 on my roof after rolling at turn 8 at Eastern Creek

build06.jpg

I did get a bit more awesome over the years, with a best of 2nd at the Wakefield 500 with Mark and Tom Browell (we was robbed, no seriously we were). Also met a grumpy old man called Neil who volunteered to help out, I bet he regrets that by now....

build06-1.jpg

BTW the sharp eyed among you will notice these pics predate digital cameras as well as SAU......

  • Like 1

So what is the race car and why?

I had been running the gtst hard at track days for years, and also paying to lease the Lanos for a couple of seasons, until finally a very bad influence (Mark Hawkins) talked me into buying a dedicated race car. Considering I had no idea which end of a spanner to hold it was a big decision....if I'd know then that I would work on the car 20 days for every day it was on the track I probably wouldn't have done it....and I'm sure glad I did do it.

Back in 2003 the CAMS Production Car regs (3E) being run in NSW and nationally, and the Targa rally regs were almost identical so we decided to target both uses to make a big range of events available. I could also have log booked it in Improved Production (3J) and in fact there was one other GTR racing there at the time, but a GTR is totally hobbled by the 2x 28mm restrictors it would have to run.

The car runs in the same basic spec today, limited by the 3E rules. In the meantime Targa regs went bug shit and allow you to invent a spec, pretend there are 10 cars out there and build the car to those specs which means the car is no longer a good fit to those rules and is no chance of front running. It's no longer an outright chance in 3E either, but considering it's 25 years old I'm OK with that. An Evo 9 or 10 is the thing to have there because they are allowed to run 1.5 bar boost.....

Mods allowed under 3E are:

Brakes - standard size discs (can be upspecced but have to be same size), calipers must have the same number of pistons (4 front, 2 rear) but are otherwise free, all other components, cooling, brake lines, ABS, master cylinder etc standard. A few years down the track in FAST I discovered N1 spec 32s had little rubber deflectors on the castor rods so I bought a set and run them too

Wheels - standard size (17x8) on vspec 2. Limits both rubber width and rotor size in rally spec.

Turbos - standard. big old laggy bush bearing 80s technology

Boost - standard, the workshop manual says the wastegate opens at 0.8 bar (12psi) so that is what we have to run. It was probably higher stock but we've never been able to prove it.

Engine - has to be standard except sump (hi octane 9l) and oil pump (nitto) and forged pistons (no more than 0.5mm over). Is measure for compliance including bore, stroke and head ccs each time it is sealed

Zorst - free for 3e and 90mm for Targa

Fuel - surge tank with 044 through standard FPR and injectors

ECU - free, I run a powerFC

Suspension - shocks and springs are free and I run a custom Bilstein/Eibach setup Gary specified. He knows his shit and gave me an excellent compromise for track and rally use which has been very fast. Standard sway bars. Replacement (adjustable) "elastometric" ie not solid buses are OK. All standard control and steering arms. HICAS disabled.

Interior - Safety gear like cage, harness, window nets, FIA seat, kill switch. Some extra gauges and a replacement steering wheel.

Exterior - lairy paint job with stickers.

Cooling - free to add coolers, I run a large oil cooler, larger radiator with stock fans and a small power steer cooler.

Everything else is standard and the car is very heavy, 1480kg in 3E spec. It makes about 240kw in 3e spec (12psi) and 280kw in Targa spec (18psi)

The import process was interesting, and I understand this particular scheme is still open in the same form.

Basically it was imported as Race/Rally car which needed me to hold a C3 or higher license, demonstrate a racing history and document my plans to use the car. It did not require compliance, and under the NSW rules of the time we were able to obtain conditional rego to drive it to events, practice and workshops. It has held that rego since, and I understand the rally rego scheme has finally be reintroduced this year (it was shut down due to dodgy importers bring in race/rally cars then rebirthing local cars)

The car was 400k yen and about $6k more for broker fees, transport, import duty, customs and quarantine etc.

So....you get a second hand car from Japan which will be a race car, so what do you do? Spend months carefully checking and prepping it to make sure it is track worthy right?

nope, we just put it on a trailer and took it to Oran Park to a NSWRRC super sprint. It was 29 Feb 2004.

build07.jpg

These were awesome back in the day...all you needed was an L2s, there was a standing start and then a couple of laps.

Highlight of the day was watching Kel launch it a 8000, stick it up the inside of Scott in turn 1 and go on to win.

I also blew the ceramic turbos, spun a bearing and destroyed the clutch. Welcome to the repeated story of the next 13 years.

  • Like 3
I also blew the ceramic turbos, spun a bearing and destroyed the clutch. Welcome to the repeated story of the next 13 years.
Rinse repeat for pretty much each track day yeah?

Where was this info, before I brought mine :woot:

Such a joy to load your skyline on to the trailer under it's own power after a track day.... So I've been told. Enjoyed the read!

Ah Yes Mr Slacko harrassed the shit out of me about putting up a build thread and sat back and did nothing.

I gotta tell ya Nigel there have been plenty of times his bitch has been pushed,,,shoved,,,winched and even driven onto the DEATH trailer with no clutch.

I can't wait for the loss of blood stories.I have seen Mr handles turn white as a ghost on numerous occasions.

  • Like 2

I remember watching it being driven onto the trailer of death...whilst it was freezing farking cold and dark

See the problem we have here Zebs is where does this all lead,,,DEATH trailer stories would be an entertaining thread on their own. Mel & I borrowed it once and once only,,,we used it to go to our 1st hillclimb up at Bulladelah,,,shit you not a cross brace on the front broke off and no way could you go over 80kmh or the death wobbles would take over. Moving the car around on the trailer made absolutely no difference. Man that was a scary drive. We bought our own trailer after that and big boy Fatz is still using it. Ask Handles about our wonderful journey back from Wakie one frightful night.

  • Like 1

Duncan

about time you big homo.

in other news, Wife and I were cleaning up the house and I found some old printed photos from a motorconcepts day in 2002.

HGE001 makes a few appearances!

i'll see if I can scan a couple later.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...