Jump to content
SAU Community

Recommended Posts

Corporate-Logo-black-background_zpscc39a


SAU.NSW officially would like to thank Nulon for hosting this wonderful event about lubricants





Please watch above video!

Topic: Nulon Oils and Additives



Day/Date: 18th February



Time: From 6pm to approx. 9pm, but be there a little earlier. End time is just approximate, please be aware that most tech nights that we have held have gone over time.



Address: 17 Yulong Close, Moorebank. As soon as you pull into Ylong Close you can see us at the end on the right.



Google Maps URL: https://goo.gl/maps/KXuIi



Parking: Plenty of Parking in their car park!



Food and Drink: Snacks and drinks will be provided with thanks to Nulon


This event is Free for Members - although non-members still have time to apply and pay for membership!


Each SAU NSW financial member registered and in attendance for this event will recieve a bottle of synthetic oil and fuel treatment : for any special requirements please let us know in this thread and we will take note and see what we can do


Please also put up in this thread any Questions you would like to have answered on the night.


Spots are limited with a minimum of 25.


This tech arvo is held with thanks to Nulon. The Night will be on lubricants and additives including their effectiveness for both road and race applications. This will be a very informative night!

One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general.

When attending one of Skylines Australia NSW events please try to:

* Be aware of surrounding environment and act accordingly.
* Drive courteously on the state’s roads as a true enthusiast should.
* Understand how important it is to maintain the good name of SAUNSW and thus, treat others accordingly.
* Any misbehaviour will not be tolerated and you will be asked to leave.



*** All advice and demonstrations given by workshops, professional practices and factories for SAU.NSW Tech Nights are the responsibility (of accuracy) of the establishments - not the car club.

*** Details may change. check back regularly.

The List


1. Crashdown (P)
2. Terry_GT-R34 (M)
3. Redline_GTR (E)
4. stagea pete (M)
5. RiseofBrutality (M)
6. RBrennan25 (M)
7. kila32 (M)
8. levinboy (E)
9. 34GeeTeeTee (VP)
10. Carmen (M)
11. Aggroman (E)
12. sammi_d (M)
13. GoldZilla (VP)
14. Cassbo (M)
15. WAGON_BOY (M)
16. Daleo (E)
17. MrStabby (M)
18. Jordy32 (TBC)
19. ianjb (M)
20. Greg_FR33GTR (M)
21. GTofuS-T (M)
22. Hanso (M)
23. MrFijiGold (M)
24. Deka (M)
25. skak007 (M)

26. Mr33yo (E)

27. Scott Black (NM)

28.

29.

30.

Just so everybody knows. I have added the following to the bottom of first post. It is just some general rules that we ask people to follow at our events.

One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general.

When attending one of Skylines Australia NSW events please try to:

* Be aware of surrounding environment and act accordingly.
* Drive courteously on the state’s roads as a true enthusiast should.
* Understand how important it is to maintain the good name of SAUNSW and thus, treat others accordingly.
* Any misbehaviour will not be tolerated and you will be asked to leave.

  • Like 3



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...