Jump to content
SAU Community

Recommended Posts

Squires Loft Nunawading BBQ will be in attendance again this year for Motorsport Rounds where possible :D

Doh, can't make it, so looks like I'm going to miss out on a good feed as well as a run at PI

Does it cost anything to just to come down and spectate? Is there good parking spots for spectators?

can I park up inside the venue someplace?

also nismoid don't forget to add artichoc to the sunday list with me, cheers :)

Gonna be a hot one over the weekend

Do we have a garage sorted yet?

Wheres the best meeting point before hand?

Was thinking the Macca's/Coles servo on the left straight after getting off at the Monash on to the South Gippie Freeway.

Scrutineering begins goes from 7:30 to 8:30? Takes 1 hr 15mins to get there from this point

So meet there at say 6:15 a.m? Or too early :wacko:

What about United Cranbourne since it's the last spot for E85 before PI? I think it might be a little out of the way for some people but I'll be there at 6:30am.

Happy with that, im on e85 too. Cya there :thumbsup:

  • Like 1
UPDATED Squires Loft Nunawading BBQ LIST
Please confirm if you are not on the list!!!
Remember the BBQ is FREE for SAU-Vic members only, get those memberships in - support the club that is supporting you!
Saturday
r31nismoid
matlowth
ripper_bravo
Snowman
acsplit
Odium
FINER6
miniwog
llama_au
Mick - MiColour

Total - 10
Sunday
r31nismoid
matlowth
ripper_bravo
Snowman
acsplit
Odium
FINER6
llama_au
vetter2769
arctic-choc
Tony Olsson & Robyn
blah_blah
Brett SS
Borci88
miniwog
Richo +2
atko92 +1
gtr jet +1
Mick - MiColour

Total - 24

Green_S13 - you still don't have a membership tag! Get that membership sorted.
jayjayjay - same as above
INXILE - same as above/above
Suggest you boys flick off an email to Anna: [email protected]
I did the last round of member updates this morning and none of you boys were on it!
Looking like a MASSIVE weekend for SAU-Vic Motorsport. Great start to the season

Flick off email to Anna :)

You would've have a forum tag if you were not paid-up. So that's ok... You sometimes need the sticker for CAMS though (when they check cards)...

That reminds me, NFI where mine is

  • Like 1

Hey guys Saturday will be my first race meet, just to confirm is there anything extra I need to get my car on the track other then

Blue triangle to locate battery

Tyre valve caps, ( plastic or metal ? )

Fire extinguisher with metal bracket

Car number ( can I write this on the window )

Car in roadworthy condition, full length clothing and Helmet.

Any advice is much appreciated.

Hey guys Saturday will be my first race meet, just to confirm is there anything extra I need to get my car on the track other then

Blue triangle to locate battery

Tyre valve caps, ( plastic or metal ? ) Metal are generally prefered

Fire extinguisher with metal bracket

Car number ( can I write this on the window ) PI will supply you with a number when you sign in

Car in roadworthy condition, full length clothing and Helmet.

Any advice is much appreciated.

What you've listed is just about all you need for the day.

Then it's just tools for maintenance throughout the day + something to check tyre pressure.

Also food and drinks if you don't want to purchase stuff from the canteen.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...