Jump to content
SAU Community

Recommended Posts

Josh at Forge Performance is helping me out, i want it done properly, especially with the throttle body rework and resealing the plenum properly as well as the hoses.
hes a champ and looks after pricing really well so im happy to use his assistance.

pin hole leak in one of the pipes... it let out sooooo much coolant lol

all fixed.

must say, she does seem to be in good company at FP

1511648_895896273803954_4276019161622516

also... mmmmm sexy wrinkle paint for the plenum

20150511_131856_zpsygyi8tx9.jpg



20150511_131717_zpsml8wyfqg.jpg


blasted back to bare metal and refinished.

I think the intake side needs greddy hard-pipes and all new metal IC pipes all done the same?

then a deep candy red for the rockers and cam cover, neaten it all up a bit.

the old paint, like all, was cracked and flaking off, looked a bit shitty.

20150118_131742_zps1s7zubke.jpg

Edited by GH05T
  • Like 1
  • 5 weeks later...

haha,
well picked up a gtr passenger seat last night and i have a fixed bride drivers seats arriving hopefully this week. ill get be a gtr back seat from a mate when i go to the hills next and it will look a bit better.

  • Like 1

lol, i put the passenger seat in yesterday but it needs a good clean, will do as a place holder untill i track down a mint one. more delays in my bride seat turning up but ill have both in soon, Josh at forge is gonna hook me up with a gtr rear too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...