Jump to content
SAU Community

Recommended Posts

11010981_1060340333992342_40680820312060

Entries are open!

We are using the CAMS online entry system for this round https://www.meecamsau.com/

Please select Skills Training if you would like to be involved in that group.

Cost $185 for members, $225 for non-members

Maximum of 60 entries

Sup & Regs

-----

“Skills Training Group” sessions are a separate group in this event and Drivers participate only in this group.

  • The Initial Skills Training session will be conducted under the control of a pace car. Drivers that have nominated for Skills Training will be driven by a Driver Advisor (up to 4 occupants in a vehicle) in a sedan. The Driver Advisor will complete a number of laps (under space car control) educating on line, braking, acceleration, cornering and other skills.
  • Thereafter; Skills Training sessions will consist of an Eight (8) minute timed session, plus cool down lap. The number of laps in this component may be varied at the discretion of the Clerk of Course. Cars will be released onto the circuit one at a time with a suitable gap between each car.

-----

SAU VIC are conducting this event.

This event has a focus on driver training and skills improvement. The event will be un-timed, meaning we can run passenger laps.

While there is a focus on training for the day, more experienced drivers are welcome and will be grouped appropriately. So if you are looking to test your car, take your mates for a ride or just come to a low stress track day this is the one to come to.

There will be SAU VIC member pricing discount for this event along with SAU VIC membership discounts
.

Link to comment
https://www.sau.com.au/forums/topic/453508-sau-vic-sandown-saturday-4th-april/
Share on other sites

so no come and try licences available ala' rexnet richo?

Unclear on that one yet...

Do we need to be an SAU member to attend? I notice it says affiliate clubs in the supp regs, is that CAMS affiliated clubs?

Very keen to come along to learn some new skills.

You'll need to be a member of a CAMS car club

Just sign up for a full year one. Only like $90 bucks :/

+1, if you want to come and do a motorkhana or any other track day in the next 12 months, then you've blown money on a Come and Try licence for nothing. Just get the full one and enter ALL of the events.

  • 2 weeks later...

What do I need to do to be able to attend this meet I'm not a member of any car club and I don't have a cams license

Hi Andy,

The simplest way is to:

1. Sign up to a CAMS Affiliated Car Club. Obviously the best / cheapest is SAUVIC ( http://www.sauvic.com.au/sauvic_app ), then once you have an SAU VIC Membership number...

2. Sign up for a CAMS Licence (Level 2 Speed (L2S)) at ( www.cams.com.au )

3. Create an account for Cams Event Entry ( www.meecamsau.com ), set up Driver Details and Car Details, then Enter the event :)

4. Do some basic preparation on the car, strip out loose items, install a fire extinguisher from Autobarn, etc

  • 4 weeks later...

Thanks to O-brake Australia & RacePace Motorsport our Sandown track day is almost here. Saturday 4th of April is only a few weeks away.

While we don't have natsoft timing on the day, you can use your phone / lap timer. This day is going to be relaxed with lots of laps! So a good day to try out damper settings, aero, tyres pressures and driving technique. Oh and the passenger laps, so bring your partner, friends and family along.

We have a special driver skills group for those that are new, or just want some tips on getting around the track faster.


Enter via the link below, if you don't have a CAMS license yet still use the entry link below. Just type TBA in the CAMS license field. If you are TBA'ing your license you will need to complete the CAMS forms and bring them along on the day, this is only for SAU VIC members, if you are a member of another club you'll need to do this via your club.
https://www.meecamsau.com/

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...