Jump to content
SAU Community

Recommended Posts

Looking to build or buy an exhaust that is super stealth and quiet but is non restrictive up to around 350kw. (no i do not want to go a varex muffler)
Currently running 3inch turbo down to cat then a 4inch kakimoto.
I was thinking from cat back run a 3inch exhaust with 2 mufflers ? any other ideas or sneaky stuff people have done ?

Link to comment
https://www.sau.com.au/forums/topic/453530-sleeper-exhaust-systems/
Share on other sites

What do you mean sneaky?

I ran a hooker aero chamber and a Berkeley straight through at the rear. Was under the legal vole by a fair bit, no drone and flowed over 300 rwkw.

Research exhaust design. Two mufflers the same don't do much more than one. Fit the biggest mufflers you can fit. Look at branch resonators if you have a particular frequency drone you want to cancel.

I tried a few combos until I was happy with the result.

  • Like 1

By sneaky I mean running a stock cat back exhaust then running a waste gate with a small pound spring to vent out exhaust gases. attachicon.gifImageUploadedBySAU Community1423175348.468724.jpg

Like so :) ^

very cheeky indeed, similar to how OEM cars get away with noise. If you crack open a stock EVO muffler it uses a little flapper to control noise when doodling around town.

I have the HKS silent hi power on my GT-t. Has a Hypergear SS2 turbo, custom 3' dump and front pipe and hi flow cat and its really quiet at idle. I can confirm that the nismo is quieter having been on a few cruises with Raj.

And I'm currently making 320.6 rwkw at 22psi on E85 so it doesn't appear to be too much of a restriction

plus one for the Nismo.... i put one the 3" version on a N/A skyline and it was still very quiet and sounded batter than any custom system i had heard before.... i was very suprised when we started and drove the car.

another option is like the exhaust i have i think its a fubijsbu its a twin 2.25 inch system with a single straight through muffler at the rear and 2 resonators, passed EPA and flowed 350kw

I got a full 3.5" turbo back exhaust with a custom oval 3.5" muffler and a custom AES 3.5" rear round muffler

Nice and quiet and doesn't drone, been pulled over for rbts and by random cops in the city and even asked to rev the car and they were happy with the volume

So far flows 450kw ample for your power

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...