Jump to content
SAU Community

Recommended Posts

Hi all

I'm doing a boost controller and fmic instal link http://www.sau.com.au/forums/topic/454062-car-making-0-boost-after-ebc-and-fmic-install/

It wasn't working and I decided to take off the fmic and put the smic back on

I did this then started my car. The stock boost sensor was working now and it climbed slightly. I revved my car and the greddy ebc got to around -99. I stopped revving it and switched my car off and the turbo timer kicked in. While this happened it sounded like the car died then started back up then died and started back up. It was like a sort of stop stutter thing. I ran to pull the negative terminal out the battery to make it stop. There was slight grey smoke coming out of the engine at this point too.

Car was going fine before I removed the fmic I just put in and installed the smic.also I didn't tighten any hoses which connect the afm or smic as I was going to take it off again shortly.

Can someone please help. I'll try find a mechanic that can help but please can someone give some help

Link to comment
https://www.sau.com.au/forums/topic/454075-is-my-car-fd-urgent-help/
Share on other sites

I wouldn't stress over it, id put the fmic on and tighten all pipes properly, then just set up wastegate as stock until you can figure out or find some to install it properly..

it would be stalling because the pipes were loose, so a vacuum leak

Replace the short, un-teed piece of hose to your fuel pressure reg, the way it was before you did the EBC install and never touch that line again.

Put the original hoses for boost control back. Make sure all your IC pipe clamps are tight.

See what it does then.

Oh, and f**k that turbo timer off. You don't need it. No-one has ever needed one. Just do the turbo cool down manually. And they are illegal anyway.

  • Like 1

Okay cheers guys. I did freak the f**k out a bit aha. If I re connect the fuel pressure regulator the way it was then how would I wire in the boost controller ? Also I know about the turbo timer but when I purchased my car it had one and I have no clue where it is ? Started to think gtt's came stock with a built in one because I have no clue where it is and I was told the car was completely stock upon purchase (which besides a pioneer head unit it was)

As above Put the FMIC back in and make sure all the hoses are tight and remove the T from the fpr line. As for a boost source - the line you blocked off on the bov return pipe was for the bleed line - you must have had another line to supply boost to the original boost solenoid (normally from the pipe going to the intercooler).

The factory boost sensor is connected to the back end of the plenum. That's the BEST place to get a signal for other gauges or EBC on a Skyline. The EBC install manuals only tell you to use the FPR signal line because that one is available on pretty much every car. Even if it isn't the smartest option.

It shouldn't be that hard to connect a EBC, it needs a source of pressure, it needs to be connected to the wastegate, then it needs to be able to bleed that pressure off, simple as that..

on my apexi, one end of the solenoid has the tube connected to the FPR, other end to the wastegate, simple as that, the solenoid has its one hole to bleed pressure off and control boost, the electrics plug in to controller and that's it..

Edited by AngryRB

I'm located in Perth and I think I solved the problem with the car stuttering but there's still no boost. My cars drivable now so I think I'll just drive it to a workshop to fix it up then tune my ebc on their dino and get a tune while I'm there. Thanks for the help guys !

Also I know about the turbo timer but when I purchased my car it had one and I have no clue where it is ?

Do you have an alarm/immobilizer installed? Some of them have a built in turbo timer, so find your model / manual and have fun trying to reprogram it, usually a sequence of turning the key on/off a million times at exact intervals.. haha... good fun...

Well I bought it from a dealer so legally there needs to be an immobilizer but I have no clue on what one it is. I'll have a look at it later and try see if I can disable it because it's annoying

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...