Jump to content
SAU Community

Recommended Posts

Lol. I don't even want to know how much all of this has and will cost down the line.

The $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$s, gone, haha

You are dead a long time, do what you want now :)

You see blokes spending $50k+ to get a second off there already fast car. Cars that have had $200k spent on them over the years, then sell them for $85k

There are blokes on this forum that have spent a shitload more than mine will ever cost and then start all over again, all good.

Some blokes just piss it up against a wall or toss it at the TAB, whatever makes you happy :)

Not having a go man. All I mean is, because of my middle class Pay check I would not be able to justify spending that much money in one hit.

Sure if was rich I would splurge. But yet again I would be spending my money wisely.

Not having a go man. All I mean is, because of my middle class Pay check I would not be able to justify spending that much money in one hit.

Sure if was rich I would splurge. But yet again I would be spending my money wisely.

I know what you are saying, no probs mate :)

But thats why I can do this, I spent my money wisely and worked my butt off , I do not owe anybody a penny and just want to do something a little silly, but something I get pleasure out of.

When I have my car I drive it just about every day, I get a shit load of fun out of it, money well spent, love it :wub:

It is even going to be better fun soon :banana:

LOL @ this guy! Are you serious mate? I don't know what Petes bill was BUT it'd have to be starting at $30K+ im pretty sure thats enough to be classed as a high end customer!

Sure there is blokes/GTRKAT that throw bucket loads more money at those blokes than Pete did does that mean he deserved a car that wasn't setup right from the beginning does it?

Don't get butt hurt over it.

No one said he deserved the issues he has encountered.

More money than most, probably. high end build? not really in the scheme of builds.

I'm not taking anything away from the quality and quantity of parts that he has either.

You're the one who that categorized it

Don't get butt hurt over it.

No one said he deserved the issues he has encountered.

More money than most, probably. high end build? not really in the scheme of builds.

I'm not taking anything away from the quality and quantity of parts that he has either.

You're the one who that categorized it

It is just a car, a bit of fun that sometimes can give you the shits. Just like marriage, but still less expensive,LOL

'Gtr and marriage' somehow they don't go well together

I can believe that, but thats OK I am divorced, LOL

That was before I started playing with GTRs

Edited by Nismo 3.2ish

Don't listen to the haters!

LOL, no haters mate, all good :)

Everyone expected more than what the dyno showed, drives better than it looked, well up to 6000rpm, lol but it is still being tweaked.

I am not going for massive HP. It should be all done in a couple of months and I will post the results, well modifying months = ??

I have not driven a car that holds the road like this does after the driveline work I had done and I want to try some hill climb events. I believe there is one close at Wootton Way Bulahdelah, they had one in March but not sure if they do it often ??

Hill climbs are awesome....I'm up giving Neil a hand at the state champs at Grafton this weekend...Mick is meant to be heading up here too.

There is one at Buladelah and it is f**king awesome....imagine closing a 3 lane road and letting people drive up it at full speed. A few others around like Bathurst, Huntley in Wollongong etc

Hill climbs are awesome....I'm up giving Neil a hand at the state champs at Grafton this weekend...Mick is meant to be heading up here too.

There is one at Buladelah and it is f**king awesome....imagine closing a 3 lane road and letting people drive up it at full speed. A few others around like Bathurst, Huntley in Wollongong etc

Should be a blast, Have you done some of these events ?

Been having a look at some of the events, Wootton Way looks like a great road and to be able to use 3 lanes, DREAM RUN :)

They get a good mixture of cars in these events and if I ever get to do them, someone will be happy when I grab the wooden spoon off him, lol

I had it in my mind that Wootton Way was a little country road, more like the Lakesway going into Forster from Bulahdelah, now that would be an interesting Hill Climb doing a couple of the Hills on the Lakesway. Much tighter corners I think, it is a fun road and puts a smile on your face, but one lane for normal driving, still fun :)

When I pick my car up I am going to have a look at the Wootton Way road to see what it is like first hand. I know there has been a bit of drifting done there.

Any news Pete?

It was put on the Dyno yesterday after the Dump was installed, so should have a result later today, not sure if I will get a dyno graph , I would like one ?

Still no news on the water leak but they will be doing a pressure search when the tune is done, THEY ARE LOOKING INTO THE LEAK AS I WRITE THIS :)

But getting close and I am looking forward to see if the bigger dump and Cat make a difference to the tune and if it spools a little earlier. There seems to different opinions regarding this but most say for a turbo, the bigger the better and none is even better :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...