Jump to content
SAU Community

Recommended Posts

Hey guys I have been searching and searching for the correct turbo to put on but cannot find it..

I have a rb25det, has your usual bolt ons but has stock internals..

I am looking for the best/quickest spooling turbo for skidding/drifting, I do not want to hi-flow the current as I am looking at going a 6boost top mounted setup with a external wastegate..

What would be the best turbo to run, the car is only driven 2-3 times a week but gets driven hard when it does.

Opinions on the GTX3076r,GT3076r and GT3071r?

Link to comment
https://www.sau.com.au/forums/topic/455469-best-turbo-for-rb25det/
Share on other sites

There is a whole f**king thread dedicated to RB25 dyno results that is 53 pages long.

How about looking at that for a start and seeing some different results from other people's setups.

In the end the choice is yours personally anyway so someone could have an entirely different opinion on each turbo.

A turbo doesn't have to be that large for drifting/skidding so you wouldn't even need one as large as you mentioned because you want response.

Look through the RB25 turbo thread and guaranteed you will find something you like/want.

  • Like 1

HKS GT-RS for 250-260rwkw perfect for drifting on 98.
300rwkw ++ on e85..

HKS 2835 PRO S FOR 280RWKW+

These two twos are the most responsive on the market for these power figures.
Overall awesome power curve aswell.

Jesse Streeter just sent me A GTRS Delivered for $2600.

Cheapest you'll find anywhere.

  • Like 1

If you are going to be using it internally gated bolton turbo and expect the most response out of it I do recommend our ATR43SS1PU, this turbo performs the identical way as the standard 21U high flow, it makes 20psi by 3400RPM, which is your factory turbo's response that peeks around 310rwkws on E85 fuel or about 265rwkws on Pump.

But if you are only looking to keep it as a factory bolt on temporary terms and expect a huge jump in HP after external gate and high mount is installed, I would recommend our ATR43G4SAT turbo, This turbo has similar response to a 3076 that peeks 20psi by 3800RPM, capable of making around 312rwkws on pump 98 fuel using street legal return flow cooler, and good enough to peek 420rwkws on a high mount E85 setup.

Both turbos has detachable rear dump adaptor, so it can be high mounted or low mounted without too much trouble on the exhaust piping.

I've got a Oxford dictionary pages worth of dyno reading with different turbo combinations specifically engineered for a Rb25det engine, you are welcome to give me a ring to go through couple of more specific configurations for your needs.

if money is no problem, then GTX3076 will be a light switch at 4000rpm and will take you upto 400kw's, but silly not to get a hypergear, use the money saved for tyres...

Edited by AngryRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...