Jump to content
SAU Community

Recommended Posts

Hey guys, update time again :yes:

So today I bought the last piece's of the puzzle that I need for my head rebuild

The Black Pearl will hopefully be done this weekend! That is if we don't run into an issues and if my Water Pump arrives :dry: I ordered it last week and still have not received it :down:

So in this update we have:

- Exhaust Manifold Studs w Washers and Brass Nuts to hold em in place

post-104024-0-46728700-1438165900_thumb.jpg

post-104024-0-63001800-1438165919_thumb.jpg

post-104024-0-17376000-1438165911_thumb.jpg

_________________________________________________________________

- Timing Belt Oil Seal Kit + Timing Belt Tensioner's

post-104024-0-03952000-1438166018_thumb.jpg

_________________________________________________________________

- Permaseal Turbo Gasket Kit

post-104024-0-55741900-1438166053_thumb.jpg

_________________________________________________________________

- 10l of Penrite Radiator Coolant

post-104024-0-29158700-1438166137_thumb.jpg

_________________________________________________________________

- Penrite 10w40 10|Tenths Racing Oil + Filter

post-104024-0-51765500-1438166208_thumb.jpg

_________________________________________________________________

I'm officially ready for this weekend! I hope my Water Pump arrives tomorrow or Friday :(

Either way I will let you guys know what happens!

Until then :action-smiley-069:

  • Like 1

Hello loyal readers! :action-smiley-069:

So, AWESOME news, my Water Pump arrived this morning! Courtesy of Kudos Motorsports

post-104024-0-20301900-1438261773_thumb.jpg

_________________________________________________________________________

post-104024-0-11345300-1438261776_thumb.jpg

_________________________________________________________________________

This weekend will go ahead!

I am dedicating Saturday and Sunday to this job, so hopefully come Sunday The Black Pearl will finally be running again :yes:

Starting @ 9am Saturday, on my team I have a qualified mechanic and a good mate who has recently just done this exact same job with his dad (Also a qualified mechanic), So I know this job is in good hands :D

I will be taking footage via Go Pro and will upload these right here for you :thumbsup:

Until then!

:thanks: for reading this far

  • Like 2
  • 3 months later...

I bet you guys never thought you'd hear from me again :thumbsup:

However, as I've said somewhere on this thread, you can't get rid of me that easy :no:

So, a lot has happened but at the same time, not much has happened. So, we did complete the head-swap, HOWEVER, little did I know, this was the start of a nightmare for me :unhappy:

So... Head swap was done but when the car had it's first start it was making a very bad noise. I feared the worst (Bottom end damage), however luckily it wasn't.

For weeks, we were trying to figure out what this noise was. We checked timing, all sensors, everything! But to no avail

So, I ended up towing my car to PZP. $987 later and we found out the reason for this is because the lifters had not been bled properly

I got the car back from PZP last week, however there is still the slightest lifter noise occurring. PZP had advised me the car needed to be driven for 2 weeks to try and get oil up into the lifters and then the sound should go away.

So, I did just that! I took it for a nice drive on Saturday :D However, this noise got louder :/

So, I think I am going to take the car back to PZP on Saturday to advise them of this. When I got the car back, PZP advised if the noise does not go away, the next step is taking the head off..

At this point I'm thinking an engine swap will be a cheaper option than what re-taking the head off will cost :geek:

But at the same time, I don't want to buy another engine and then have more issues, so I'm stuck between a rock and a hard place :unsure:

Opinions would be great!

Until next update :miner:

- J

So how bad is the noise now. If it's not that bad u could probably just put up with it. You could also try different oils thicker or thinner depending on what's in it now and see if it changes at all. Hard to say without being there to hear it properly. I used to have an sr20 with lifter tick. I still thrashed its guts out for 2-3 years without issue.

I dont know where $987 comes from cause wouldnt they just have to put a feeler guage under the cam lobes to see that the lifters arn't pumped up? must be $900/hr at that place..

They may have cleaned things a little too well at the engine shop, cause the lifters and the lifter bore rely on tight clearances which on older engines help to cover up with carbon, this why its not good to clean old engines i reckon..

You could try removing the lifters and see for yourself if they can pump up, I changed some LS1 lifters not long ago, they were brand new and hard as, but when put in car they were good till things got hot then sounded terrible so most likely the bore was worn cause its alluminium, this is a possibility...

Edited by AngryRB
  • 1 month later...

You could try removing the lifters and see for yourself if they can pump up, I changed some LS1 lifters not long ago, they were brand new and hard as, but when put in car they were good till things got hot then sounded terrible so most likely the bore was worn cause its alluminium, this is a possibility...

-----------

Hey Angry, I ended up removing the Lifters and then manually bleeding my original Lifters to install, it worked but then this happened -_- (see below update)

Update time:

Put Lifter-Free in The Black Pearl to try and get rid of the terrible Lifter sound, took it for a quick drive to the servo afterwards. All went well and the ticking went away! Yaaaay! Or so I thought -_-

Since the noise went away, I went for a drive to stretch the cars legs finally. Got 10 minutes down the road and saw some steam coming from my bonnet.

Pulled over immediately and saw coolant had gone everywhere ? if you look at the picture, you can see the cause of this is my Water Pump pretty much snapping...

So, now need to get a new Water Pump and off to HyperDrive she goes to get fixed. I hope this is the last time...

post-104024-0-92793500-1452609239_thumb.jpg

Edited by MC-WOSHY
  • 3 weeks later...

Wow. That sucks. How tight was the belt?

Pretty tight for that to occur haha. I didn't do it, my mate did. Didn't blame him though as I knew the risks etc before getting the work done

------------------------------------------

Who tightened the belt? thats a pretty easy DIY job..

Same as above :P

------------------------------------------

Hey just read through this whole thread, awesome work bud, I guess we all get a bit of bad luck sometimes but keep at it.

should have my own series 1 r33 within the next couple of weeks, so just doing research now.

Cheers man, glad you like the build so far! Lot of work and money has gone into this car :D And a lot more to come (read my update below). Awesome! going to make a build thread too??

------------------------------------------

Hmm lifter tick and a broken water pump, its fun to learn but cheaper sometimes to get a good workshop to do the work...

Yep, totally agree! Prior to this I did all the work via HyperDrive, this was the first time I tried myself. Let me tell you know, that's never happening again! Going back to letting professional's do the work :)

Ok guys,

Sorry about the lack of updates on the update front. Had some bills come up, recently sold my Pulsar and just brought a GQ Patrol (Gee I love Nissan's), which needed a few things.

Never fear though, the Skyline has/will never miss out on the love!

Genuine Water Pump take 2:

post-104024-0-88013400-1454587008_thumb.jpg

Car goes into HyperDrive next week to have the new Water Pump fitted :D They are also checking the engine out to make sure everything is fine. Hopefully and I mean HOPEFULLY this all goes well. I would love nothing more than being able to drive the darn thing for more than 10 minute's! In the last 6 months I've driven it twice, which is a lot less for my liking. So I'm hoping next week I can start hitting consistent boooooost :banana:

Providing all goes well with this, The Black Pearl will be getting some love as a reward ;)

- Z32 AFM

- GReddy PRofec OLED

- 950cc DeatschWerks Injectors

- 6Boost Manifold (Low-Mount)

- Garrett GTX3076R w .82 Rear Housing

- HyperDrive Tune

Can't wait for that, will take me a couple of months to save up as I'm paying for it all up front.. But waiting and slowly accumulating the parts is half the fun right? :yes:

More on that after next week though, need to make sure The Black Pearl pulls through this Water Pump installation without any further issues

Until then guys, thanks for reading! :action-smiley-069:

After driving a GQ patrol, the skyline will feel like a 10second car lol... mine has become a museum piece for the last year :yes:

Yep... you are dead right Mark! Now just need to make it 10secs ;)

That's no good, what's being done to her!?

Bit dusty, but..... SHE'S BACK! :bunny:


Running healthy now, so that only means one thing... UPGRADES! :w00t:


Keep an eye on this space :yes:




Would like to give a shout-out to HyperDrive in WA, they did an awesome job for a fair price, couldn't recommend more! :D




post-104024-0-54453200-1455098657_thumb.jpg


  • Like 1

Yep... you are dead right Mark! Now just need to make it 10secs ;)

That's no good, what's being done to her!?

she's got a dirty 30 with neo head in her, lol... need pipes fabricated and then tuned and she'll be proper angry :mrt:

look forward to your future upgrades, good looking R33. :thumbsup:

she's got a dirty 30 with neo head in her, lol... need pipes fabricated and then tuned and she'll be proper angry :mrt:

look forward to your future upgrades, good looking R33. :thumbsup:

Ooooh, I like! Similar to what I want to do, but I'm torn between doing it for the 33 or my dream car (34R).

Cheers mate, really good to see people have been giving the thread a following (like yourself), you've still been following from the early days! :worship:

Thanks mate, appreciate the kind words! Not done on the look of it yet, still little bit's to take care of.. eg:

- Coilovers (STD Coilover's is what I'm getting)

- Enkei RPF1 (In Blaaaaack) - 18X9.5 +15

- Whiteline Sway-Bars (Front & Rear)

- Front & Rear Strut Bar

At that point I'll be happy with the outside, will just be little thing's to tidy up like seals etc

But that's all part of the journey! :cool:

Edited by MC-WOSHY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...