Jump to content
SAU Community

4wd Light On


Recommended Posts

Dunno about the R33 GTR, but the official R32 service manual pdf is on the net in many places. The procedure for entering diagnostic mode is probably the same.

I would say though that it is far better to go to a workshop that has a good scan tool and hook that up to the Consult port than trying to get shit computers into diagnostic mode. It's much easier to read codes in plain text than try to interpret the bloody flashes on the dash!

Link to comment
Share on other sites

A bit more info would help

When does it come on, ie straight away or after driving for 1/2 hour etc

First check fluid in the reservoir in the boot

There is a fault code list somewhere that you count the flashing light on the ECU under the pacel shelf

Link to comment
Share on other sites

Dunno about the R33 GTR, but the official R32 service manual pdf is on the net in many places. The procedure for entering diagnostic mode is probably the same.

I would say though that it is far better to go to a workshop that has a good scan tool and hook that up to the Consult port than trying to get shit computers into diagnostic mode. It's much easier to read codes in plain text than try to interpret the bloody flashes on the dash!

Thanks Im in the US on this one so I will be taking it in for the full timing belt soon but wanted to get some sort of an idea. thank you

Link to comment
Share on other sites

A bit more info would help

When does it come on, ie straight away or after driving for 1/2 hour etc

First check fluid in the reservoir in the boot

There is a fault code list somewhere that you count the flashing light on the ECU under the pacel shelf

Its on when the car is turned on -

its at the mark for max fluid

thanks - the car has been sitting for like almost 4 years when I got it.

Link to comment
Share on other sites

Its on when the car is turned on -

its at the mark for max fluid

thanks - the car has been sitting for like almost 4 years when I got it.

One possible cause is insufficient level in the BRAKE fluid reservoir (I'm speaking from experience here).

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Embrace the freedom of casual encounters on the best dating app in town! Verified Maidens Superlative Сasual Dating
    • Slimline sub on the rear parcel shelf is doable. Pioneer TS-WX140DA is only 70mm high.   
    • People like Johnny Dose Bro might be laughing at my post because I accidentally added 100mm to my numbers. 350-355 is indeed the lower limit. 450 is off-road Skyline spec.
    • What is the "compromise" that you think will happen? Are you thinking that something will get damaged? The only things you have to be concerned about with spherical jointed suspension arms are; Arguments with the constabulary wrt their legality (they are likely to be illegal for road use without an engineering certificatation, and that may not be possible to obtain). A lot more NVH transmitted through to the passengers (which is hardly a concern for those with a preference for good handling, anyway). Greatly increased inspection and maintenance requirements (see above points, both).   It is extremely necessary to ask what car you are talking about. Your discussion on strut tops, for example, would be completely wrong for an R chassis, but be correct for an S chassis. R32s have specific problems that R33/4 do not have. Etc. I have hardened rubber bushes on upper rear control arms and traction rods. Adjustable length so as to be able to set both camber and bump steer. You cannot contemplate doing just the control arms and not the traction arms. And whatever bushing you have in one you should have in the other so that they have similar characteristics. Otherwise you can get increased oddness of behaviour as one bushing flexes and the other doesn't, changing the alignment between them. I have stock lower rear arms with urethane bushes. I may make changes here, these are are driven by the R32's geometry problems, so I won't discuss them here unless it proves necessary. I have spherical joints in the front caster rods. I have experienced absolutely no negatives and only positives from doing so. They are massively better than any other option. I have sphericals in the FUCAs, but this is driven largely by the (again) R32 specific problems with the motion of those arms. I just have to deal with the increased maintenance required. Given how much better the front end behaves with the sphericals in there.....I'd probably be tempted to go away from my preference (which is not to have sphericals on a road car, for 2 of the 3 reasons in the bulleted list above), just to gain those improvements. And so my preference for not using sphericals (in general) on a road car should be obvious. I use them judiciously, though, as required to solve particular problems.
    • Easiest way to know is to break out the multimeter and measure it when cold, then measure all the resistances again once it gets hot enough to misfire. Both the original ignitor and the J Replace version. Factory service manual will have the spec for the terminal measurements.
×
×
  • Create New...