Jump to content
SAU Community

Recommended Posts

Great idea!

Count me in

I tried to make/source something similar myself but ended up with rubber type products that just don't handle the pressure.

Great to hear StretchGSK ! As you say vulcanized rubber is a poor material for this purpose, I think availability and economy of the hockey puck method was the reason rubber has been the main focus up until now. Under perfectly even compression over the whole area of rubber it is fantastic but any type of localized pressure (eg. the pinch seam) or bending it will not hold up and break, it also has poor chemical resistance which isn't ideal for a garage.

Well they look the goods, I am yet to try them out on the hoist as most cars have shagged rails already. :P

My jacks are around 95mm pad size, and the hoist is 120mm. If you could make some with a slightly larger base it would work better, but these ones while smaller in the base are plenty large enough in the slot length.

  • 3 months later...

UPDATE !!

Thanks to many of you guys' valuable input I now have a new and improved trolley jack pad to present. The basic shape and size has been tweaked and it now has patent pending compatibility slots in the bottom which allow it to be used with most small dish trolley jacks as well as large dish.

What are your thoughts on this new model ?

I am currently waiting on a sample from the manufacturer, more updates will follow as I get them.

post-140033-0-74362200-1441962839_thumb.jpg

post-140033-0-16835600-1441962840_thumb.jpg

  • Like 2

That looks great. :)

Still using the original ones on the hoist pads, I did manage to lose one as they have a habit of getting stuck on the rails, the customer drove off before I realised. They work well, and even though they deform when weight is applied, they spring back perfectly after a minute or two.

I wonder if it's possible to taper the slot slightly to help them fall away when you lower the jack/hoist? Being bolted or glued to the hoist would fix that, but it would make it harder to align on the rail which is sometimes a pain already. Would work better on the jack than the hoist I suspect.

Some cars have plastic side skirts which limit the length of the jacking point to the width of the factory jack, so I can't use the pads on those cars without damaging the plastic. If the slot was shorter it would work better on these cars, but I like the size otherwise. Probably should machine a set down to the width of a scissor jack for a trial to see how much it weakens the design. Keep up the good work Michael. :)

  • Like 1

That looks great. :)

Still using the original ones on the hoist pads, I did manage to lose one as they have a habit of getting stuck on the rails, the customer drove off before I realised. They work well, and even though they deform when weight is applied, they spring back perfectly after a minute or two.

I wonder if it's possible to taper the slot slightly to help them fall away when you lower the jack/hoist? Being bolted or glued to the hoist would fix that, but it would make it harder to align on the rail which is sometimes a pain already. Would work better on the jack than the hoist I suspect.

Some cars have plastic side skirts which limit the length of the jacking point to the width of the factory jack, so I can't use the pads on those cars without damaging the plastic. If the slot was shorter it would work better on these cars, but I like the size otherwise. Probably should machine a set down to the width of a scissor jack for a trial to see how much it weakens the design. Keep up the good work Michael. :)

That's great to hear Scotty ! I noticed that as well, especially on cars with rails which are pre-damaged sideways, I will definitely look into it. After this product all is ready to go i'm going to start working on a specific use hoist replacement pad. That's a pity, this new design should assist with that problem. Intriguing idea, I'd be interested in hearing about what happens. I suspect it will compress to much to be of much use depending on how small you go for. Keep me posted and thanks for the encouragement !

Looks nice, be keen to grab one.

Keen to get a hold of some of these

Glad to hear it ! Hopefully they will be ready soon !

  • Like 1

Have you considered making pads to fit over jack stands ?

Once she is jacked up most people will put a couple of stands under the car. If your making them I'd be up for a set of four.

Personally I mainly jack cars from crossmember then put stands under the sills with some home made pads with slots cut out.

People have more stands than jacks so more sales for you.

  • Like 2
  • 1 year later...

Hi again everyone !

These bad boys now ready to go !

Thanks for all your help and suggestions, as your can see I've stuck with the straight sides to clear plastic trims as well as  reduced the height and slot depth. I've also left out the slots at the bottom for fears that someone might use it correctly and have an accident - Better safe than sorry ! I'm going to do an adaptor in the future instead !

I've changed the business name to Guerrilla Automotive Innovation

I'm not sure if i'm allowed to post websites, prices etc here so shoot me message if your interested !

 

Michael

 

5e82b7_05604a5b8d354f98abd29e38cb96e35e-mv2.jpg

5e82b7_ddb35648cf884747abf323a840cfd8e7-mv2.jpg

  • Like 4
11 minutes ago, Leroy Peterson said:

Are you able to confirm dimensions? I'll double check my Jack and place an order

Sounds great ! 79mm diameter; 54mm wide; 34mm high (This does vary slightly due to manufacturing method); 18x10mm slot 

I've actually only got 2 left ! I can't believe how fast they've gone ! I'll set up a pre-order option now encase you don't get there in time !

 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...