Jump to content
SAU Community

Recommended Posts

Hey guys, I may possibly enter this event. Just waiting for my membership to be processed and cams licence to arrive. Just a question on the price of the event. It says $235 for the sunday. Is that the early bird price or is it minus $40 off that?

$195. :)

+ $15 for a dorian as per the sup regs.

Sunday

Will comprise only of competitive runs. Each run will be a Multi start (Super Sprint) event of one standing lap and three or four individually timed flying laps. Competitors will get as many runs as can be fitted in on the day (Typically four or five runs). All flying laps will be timed. The entry fee for Sunday is $235.00 (Entries before 03/06/15 will be discounted to $195.00). Dorian Timers will be required for all entries at this event – they can be hired for $15 each

Hey guys. Really want to enter this. I got my cams licence in the mail last week but still waiting for my sau membership card and number. I paid on the 19/5. Will I be safe to enter or will I get my balls broken at p.I if I don't have my sau membership card on the day.

You'll be fine to enter this event, SAU VIC generally sends out the cards in batches so yours should be on the way soon if it's not already.

If it gets closer to the date and it still hasn't arrived, email [email protected] and ask for a membership validation letter for you to print out and take it along. Just in case they PI decide to be tough on the day.

  • Like 1

Entered. Look forward to meeting u guys.

Hey there,

Did you get your membership pack? If not shoot me a pm with your name etc and I'll send a new one so you get it for the weekend. I have had an issue with some in the last batch not being delivered & had to re post them [emoji37]

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...