Jump to content
SAU Community

Recommended Posts

Fuel pump I installed previously was too big for the tank. Shaved off some of the some of the plastic teeth so itll fit in but it was touching the tank n due to vibrations it hums really loud.

So asking them to take it out and shave it off completely and ditch the rubber piece and use a vice to clamp it all together.

Or just f**king get rid of the humming lol

This job just got a lot more complicated. Turns out previous owner put a gtr fuel pump in the car, which is a lot larger and to fit it they removed the sender. So now Mark has to remove the pump and put a walbro pump in to fit the sender, the bill is roughly ~$500 now.

The plus side of this is I can run bigger injectors and higher boost down the line.

Edited by Manne

This job just got a lot more complicated. Turns out previous owner put a gtr fuel pump in the car, which is a lot larger and to fit it they removed the sender. So now Mark has to remove the pump and put a walbro pump in to fit the sender, the bill is roughly ~$500 now.

The plus side of this is I can run bigger injectors and higher boost a big single down the line.

FYP

Fuel pump I installed previously was too big for the tank. Shaved off some of the some of the plastic teeth so itll fit in but it was touching the tank n due to vibrations it hums really loud.

So asking them to take it out and shave it off completely and ditch the rubber piece and use a vice to clamp it all together.

Or just f**king get rid of the humming lol

Bigger exhaust or stereo will also fix the humming

  • Like 1

Bigger exhaust or stereo will also fix the humming

My stereo is mighty loud, exhaust is loud enough for me too....stupid pump is making me think I need a louder exhaust now....but less than $50 vs $2k.....I'd rather choose the $50 option...

Been seeing a few GTT 34 around my area lately....still really want one T_T.....ageing car though

  • Like 1

Ok got Tue car back. Mark from C-red is such a top bloke. We sat down and discussed the car for 30mins going over everything, he estimates 6-8k worth of work already done to the motor. We discussed where to go next and budgets too. very good and friendly service. They out a walbro 400 in and charges for a 202?, as that's all he could get his hands on.

Splitfires, Custom Piping, Oil Filter relocation, Re-build, Candy Apple Red Spray job ;) and some other things I can't remember.

Edit: Memory kicked in - Front Mount intercooler and a bleed valve as well. (theres a couple things he noticed which I did not and I can't remember them)

Edited by Manne
  • Like 1

Morning all

Who uses tapatalk or sau app (Samsung) on their mobs.

Im using the sau app and i like it easy to use, user friendly but i find when i use the http: of sau on laptop it still has more features like if you make a topic it say how many views i get im thinking about taptalk only coz if i wanted to look at antilag.com and other forums that what they want you to use.

Whats your feed back worth trying?




  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...