Jump to content
SAU Community

Recommended Posts

Anyone know my an Rb25 would be putting out on idle?



My money is on one of these :- coils, plugs or leads. Try taking each of the plugs out and inspect them they should all look same on ends. If u want take a pic of each 1 and send to me if your unsure what your looking at.


My money is on one of these :- coils, plugs or leads. Try taking each of the plugs out and inspect them they should all look same on ends. If u want take a pic of each 1 and send to me if your unsure what your looking at.


Your engine has leads?


My money is on one of these :- coils, plugs or leads. Try taking each of the plugs out and inspect them they should all look same on ends. If u want take a pic of each 1 and send to me if your unsure what your looking at.


Also plugs only show last condition before removal.

Ie- if the engine was belted then shutoff at full noise for inspection, vs belted then cruised to a convenient place for inspection will look very different. Most ppl look at them after the car idled for a period of time therefore true readings get masked


So... What's the question?


His car has a very rough idle atm, at 1st I thought it was his cold start but only has a standard ecu, so then was thinking vac leak? He sent me a video of how it sounds and its really rough so my thoughts were what I mentiond above and yeah did mean coil packs.



  • Similar Content

  • Latest Posts

    • Thanks for the linkie. Certainly always a great deal of help when people post comparisons like these, but I think for now I'll stay away from any semi slicks. I did go ahead and order the sportcontact 7. My buddy has them on his modified A4 and he keeps saying how good they are. For my intended purposes these will probably work real well. I'll report on them once I had the chance to try them out
    • Talk about noisy. Even when I still had the Tomei under the car I could distinctly hear the tires rolling. And I doubt I ever will need maximum grip like on a track. My GTR will maybe never even see the 600hp mark and I need to get used to the car quite a bit before challenging the limits of its handling. For the next winter storage I think I will get a set of these rubber drive-on thingies that have a tire shaped base. Those supposedly really help prevent flat spots.
    • Well our climate is definitely way less hot overall and the weather can be quite picky at times. I just know that during normal road use or even spirited drives there is no way I'd be able to consistently stay in the operating temperature, and constantly changing the tire pressure would also be a royal pain.
    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
×
×
  • Create New...