Jump to content
SAU Community

Recommended Posts

1 hour ago, t_revz said:

Just put tracks on it instead

 

Would daily.

18 minutes ago, turboedsloth said:

and a turret?

Turret spec roof is for sale atm, something ridiculous like $5,500 USD...

14 hours ago, t_revz said:

 


Got a multimeter?

Don’t run a charger on the car if it has no battery. Or the charger will run flat out and the voltage could go high and cook the electronics

 

I've used a multimeter and everything is running properly. My only guess is bad/old wiring?

Update: Car has power. Battery is charged.
When I turn the key, car is oddly silent (normally I hear my fuel pump etc...)
Turn the key, car tries to start, but won't turn over.
:( 


Checked fuses and fusible links?

Immobiliser disables?
immobiliser is disabled but I don't have the tools to check the fuses (or the knowledge)


Hold one lead to a good earth such as door latch etc and the other lead touch to fuse terminals. If only one side has power pull it out and see if it’s blown



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...