Jump to content
SAU Community

Recommended Posts

On 9/2/2016 at 11:26 PM, Gillyr33gtst said:

38mm instead of 33mm from the guide for the tensioner hole no need to use two tensioner and timing marks line up spot on

Can you elaborate on this? I don't understand how the tensioner hole position has any influence on the timing marks. The drive side of the timing belt is phasing the belt teeth based on the length of the path the belt follows. I reckon using an idler pulley doesn't get the crank to cam sync quite right. The other thing is that the timing marks on the head backing plate are probably only as accurate as they needed to be assuming you were putting a timing belt back on an RB25 block (ie you aren't wrong by a hole tooth). I am probably thinking about it too much and if I truly want to get it right I would need to dial the crank to the cams properly. Thanks for the help!

You are able to get the right tension on the belt from the beginning and the tension is on the correct side and not relying on the second tensioner to get it right I found when using the two tensioners I'd be playing around with both of them to get marks lining up now the extra 5mm and one tensioner and Idler I'd set tension and marks are perfect hope I explained my self clear enough I'll dig up some pics and post of this

Cheers for that. I've ended up going with the two tensioners. 

A little update, I got it running tonight. I nearly fell off my seat it was so loud running straight off the headers right next to me. 

I set up an oil pressure gauge in my little switch box and it's making plenty. I only ran it for a few seconds since there's no water in it yet. 

20160907_210937.jpg

20160906_211257.jpg

  • Like 2

I slapped a radiator and short exhaust on it this week. Sounds absolutely awesome. Very crisp and revvy. All I need now is a car to whack it in. 

 

Does anybody have any good ideas about converting it to a Programmable ecu? I'm am idiot and didn't look into this and now have the issue of doing one if these things.

1. Buy a complete turbo loom and ecu and injectors then going nisstune.

2. As above but plugging in a pfc

3. Start from scratch with a aftermarket loom and ecu. I would be thinking megasquirt if going down this path. 

 

Any advice would be welcome.

Dave

T

20160910_194848.jpg

Edited by dave1200

Thanks but Not sure this helps me. The problem is that the Neo NA ecu and loom are different to the turbo therefore any of the plug and play ecus won't work because nobody supports the NA motor. If I have to wire one from scratch it will be a megasquirt but I'm mostly looking at the pros and cons of replacing loom with a turbo then getting a plug and play ecu/piggyback nistune style. I think I can get a megasquirt running the complete NA motor then would just need to change injectors and go to map sensor to run a big turbo but this would have much more head scratching than the other option.

I'm a DIY kind of guy. You get incredible functionality for a good price. For less than $1000 I'll get an ECU that's entirely configurable with all the I/O of a high end ECU. As I said earlier they generate more head scratching but I've got a few mates who have had good success with megasquirt as well as know a tuner who is familiar with them.

 

  • 3 months later...
  • 1 month later...

get a Nistune, less money plenty of functions.

I have a tuner license too and can get you the boards cheaper. Since you're a DIY kind of guy it can be fun soldering.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...