Jump to content
SAU Community

Recommended Posts

hey guys. first post here, was just wondering what some good performance mods would be for my rb26dett in a gtst shell so rwd, it is running 222kw atw at 13 psi atm, stock computer, stock injectors, really the only things done are a large frontmount intercooler and cat back exhaust system. it has cp forged pistons and forged conrods too, didnt want to spent too much yet as 222 is still a fair upgrade from my old non turbo r33, any recommendations and advice is greatly appreciated, thanks guys! :)

Welcome.

Best is to search this site as your question has been answered many times. Go into Google and type "site:sau.com.au <query>".

To quickly answer your question, Garrett -9 turbos + tune.

Also, this is the incorrect section for your question.

hahahaha -10's.

as about -9's and a good computer and tune.

With the turbos get some good dump pipes and front pipe. If your big intercooler is chinese stick with a stock GTR one.

Make sure you have new wiring for your fuel pump and one good enough for the power.

http://www.besracing.com/machine-shop-services.html

Can anyone tell me if i am way off track here trying to find a machine shop to do some boring and or sleeves, and some head work. The sight above is what i am used to price wise, and i dont know where to go for a decent rb build.

There is so much information on this forum, nearly every build thread has so much RB26 information

You really don't need to sleeve your block, lets just start with that.. Spend the money on protecting the engine and it's oil components rather than sleeving it.

please, if this is out of whack, tell me why?

You are in the n/a section - the turbo (forced induction ) section is above.

You are evidently in the UK so few here will know anything about UK machine shops

Search first and then ask when/if you get stuck...

Don't spend money on stupid things that just empty your pocket.

From my experience to much money is wasted on things that do little to nothing, the term "bang for your buck" comes to mind.

A good ecu and safe tune is paramount.

Do some searching, have a budget and speak to some local shops and tuners.

Have you upgraded your brakes and suspension, do you have good quality sticky tyres.

UNIGROUP ENGINEERING is good Sydney shop and Yavus will not lead you astray.

Nothing wrong with some China parts, my old china IC was fine for 500hp and my Fenix radiator never had a issue.

If you need to have brand names on everything then fill your boots, but if you are just hunting power not brand names there are some cheaper options out there which will do the same job at 1/4 the price.

Do your research on each part and how they will all work together.

China, Taiwan and some other nations supply to Japan which then just clean them up and relabel them.

I found it cheaper to get my exhaust manifold custom made in Australia when I was looking for a strong as steam pipe jobbie.

Also look at the US for parts as its usually cheaper to import parts than purchase local.

Then do a skid.

  • Like 1

Nothing wrong with some China parts, my old china IC was fine for 500hp and my Fenix radiator never had a issue.

If you need to have brand names on everything then fill your boots, but if you are just hunting power not brand names there are some cheaper options out there which will do the same job at 1/4 the price.

Do your research on each part and how they will all work together.

China, Taiwan and some other nations supply to Japan which then just clean them up and relabel them.

I found it cheaper to get my exhaust manifold custom made in Australia when I was looking for a strong as steam pipe jobbie.

Also look at the US for parts as its usually cheaper to import parts than purchase local.

Then do a skid.

Every thing is made in China these days. Heck, even my "Australian made pack of rasberries" with added Hepatitis A.

Don't get caught up in the brand name bug too much for things like IC's etc

Never compare Chinese cheap equipment like an intercooler to a branded Japanese version.

Cut them open and look at how many fins etc are inside the Chinese ones. COMPLETE RUBBISH. Stick with OEM or go to a proper brand.

Seen waste gates not open/close right and BOV's are crap. Chinese turbos cannot spool properly and get comp surge and cannot flow enough up top in the middle or down low. Do NOT put that garbage on a GTR!

**That is the knock off parts - there might be some good Chinese made stuff that is its own actual brand**

And if you got turbo manifolds that was a mistake just run OEM with low mounts.

Edited by Stixbnr32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...