Jump to content
SAU Community

Recommended Posts

Besides, I already gave you and everyone else here know how. I dropped 88E as a stock tip here when it was trading around 1.5 cents. It peaked at 8 cents.

But that means you only made 6.5c you peasant

  • Like 1

How do you rate Etihad airways? Will be flying with them to Europe.

I like flying with them.

Purely that you can buy wifi onboard for 24 hours which covers most of the flight from Melbourne to London/Paris, other airlines, you can't get/buy wifi onboard in economy class. Plus their flight time and layover time is reasonably short compared to Qantas/Emirates.

Why am I more than happy to buy wifi on board, so I can watch Netflix with subtitles rather than watch crap movies on board with/without subtitles.

But for inflight movies, I'd have to say Emirates is the best I've been to.

  • Like 1

Can confirm Vietnam airlines food is shithouse.

So my one experience was on a qantas code share so I had no idea I was flying Vietnam airways...

so I had the front bulk read row where there 3 Seats.

I was on far right.

A mum sat on the far left then had her 2 kids in the row in the middle..So of course she ignored them and they fought the whole way, well up to one vomited milk all over the floor.

the bathrooms were in the bulkhead in front of me.. 15 min after take off some people grab one of the drink cups to make a shield for the Smoke detector so there was a smoking room for the flight. So the whole thing stank for the whole flight.

Staff were not seen for most of the flight.

food was Bad..

When boarding most people looked to have been to the vic market on way to airport, the amount of food that was being put in the overhead lockers was stunning, so that nicely added to the aroma.

So yeah by the end of the flight, between smoke, milk vomit, lots of foods that have sat out for 10-12 hours plus some weird fish for the meal, what an aroma.

Lets just say from that point I checked code share flights after that.

I might be the only one who enjoyed their food, probably cause I wasn't expecting any on a short haul from Singapore to Hanoi. Made chicken and ham sliders out of their shit, which tasted better than they look

1462692195.6703.jpg

Only complaint is that I specifically requested not to be sat near Asians. Look at them, talking about me and shit

1462693046.054.jpg

  • Like 1

Waleed winning the gold Logie was worth it just for the bigoted butthurt that he been flowing this morning.

Between that and Sadiq Khan being elected Mayor of London the Australian Flag DP brigade has been flipping it!

  • Like 1

Does anyone but Waleed give a f**k about the logies?

sheeeit even he only cares because he won.... he didn't even turn up on previous years

it's a popularity contest as voted by readers of TV week ffs LOL

Does that magazine even exist anymore lol

We sure it wasn't just Waleed and a photographer from the project?

that's possible seeing as Carrie Bickmore won last year lol

I like flying with them.

Purely that you can buy wifi onboard for 24 hours which covers most of the flight from Melbourne to London/Paris, other airlines, you can't get/buy wifi onboard in economy class. Plus their flight time and layover time is reasonably short compared to Qantas/Emirates.

Is it unlimited wifi and decent speed? Might need bring my portable charger then.

So my one experience was on a qantas code share so I had no idea I was flying Vietnam airways...

so I had the front bulk read row where there 3 Seats.

Much better than AirAsia! Felt like riding in a public bus for 10hours..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...