Jump to content
SAU Community

Recommended Posts

25 minutes ago, Leroy Peterson said:

market cap of $2mil was changed to $250mil last minute. I dont get that. anyway, my measly $500 will wait till Oct. 

my thoughts exactly, no f**ks given 

I'd like to point out that E85 Scotty recently sold his yellow, stroked out evo, adding to the list of former evo owners.

However, the buyer was old mate Sunkist/Aaron...who previously owned a white one. I wonder how long it lasts in his hands...



Mate I give it a month before that flamin mongrel sells it
  • Like 2
If I buy the supra I'd have to allow 2 years for Barry to build the bottom end



No, you would become a 2j fanboi that believes they can take 1000hp totally stock
7 minutes ago, joeyjoejoejuniorshabadoo said:

 


No, you would become a 2j fanboi that believes they can take 1000hp totally stock

 

Lol 2Js are better than RBs no doubt about that

but... 1000hp from a stock bottom end sure...

might only last a few thousand Ks though :)

1 hour ago, Daz said:

If I buy the supra I'd have to allow 2 years for Barry to build the bottom end

He likes Toyotas more, it would prolly progress faster than an RB. I notice the Toyota blocks are always the most complete looking in the engine room haha

  • Like 1
2 minutes ago, Birds said:

He likes Toyotas more, it would prolly progress faster than an RB. I notice the Toyota blocks are always the most complete looking in the engine room haha


What's taking so long on yours now Birds?

2 minutes ago, Borci88 said:


What's taking so long on yours now Birds?

Shouldn't be much in the way of it besides Barry's daily work now. Machinist took ages with my block but that's done now, so onto the assembly and conversion. I've been told before end of the year so here's hoping.

2 minutes ago, Borci88 said:

Ahh really? I thought it was a complete engine ready to bolt in.. I'm guessing he's just giving it a freshen up with new bearings and what not? 

Yep sort of. It was complete (head separated from engine, but intact nonetheless). Barry offered to pull apart the block, check and reassemble...I thought it would be stupid not to while it's out and it's a second hand engine. We found the head comp was way too high from being over machined and some of the machining on the block was rough, so he sent it off to get tidied up. It's added a lot of time to the project but very glad he found that shit before it gave me troubles in the car...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...