Jump to content
SAU Community

Recommended Posts

1 hour ago, UNR33L said:

Birds when am I rebuilding your PC for special favours? 

Surely due for an upgrade? :P 

As long as it runs CS:GO I see no need for an upgrade

No time/interest in any other games at the moment

4 hours ago, TiTAN said:

You can run csgo on a potato so you will be fine.

Mine is a shoebox mini itx

Bout 5 years old but still doing everything I need with ease

I had an itx z97 machine. It's now my work pc complete with its 780 ti that spends all its time clocked up and pumping out heat as its an nvidia bug when driving 4 screens that they can't go down to idle, the home machine to replace it was an matx z170 machine and a 1070 as the other one gave me the shits with random bios resets when you turned it on, totally worth the $2500 it cost to buy the new one.

Weird. Computers and components are so cheap these days. Everything seemed so much more expensive when I was a teenager saving for a build.

20100216443_elite-120_s.jpg

My shoebox is a tight fit but small desk footprint and about as small a case as you can get with full sized components / decent power supply. Very portable for LANs not that people really do those anymore. Surprisingly doesn't get that hot, except in summer, where the side of the case will burn your hand...and I run a USB fan pointed into the vent nearest the CPU.

15 hours ago, Birds said:

As long as it runs CS:GO I see no need for an upgrade

No time/interest in any other games at the moment

Yeah it's a bit like that these days, the hardware is starting to overpower the software / games. 

 

 

I think optimisation is getting better, because you can really tell an early access games that melt PCs and has prehistoric ragdoll physics.

Also I think graphics manufacturers are focusing on crypto mining hardware rather than backing developers to. Push better products etc

I can't keep up with GPU releases these days

Maybe my time awareness isn't on track, but in the teenage years it was a big deal when Nvidia released any new model like the GeForce 2 GTS. Now the number on the end just seems to go up every other month.

34 minutes ago, Leroy Peterson said:

I think optimisation is getting better, because you can really tell an early access games that melt PCs and has prehistoric ragdoll physics.

Also I think graphics manufacturers are focusing on crypto mining hardware rather than backing developers to. Push better products etc

lol reminds me, some guy at work fooled the IT department into building him a rig with a Quadro card saying he needed it for CAD...he had it mining bitcoins 24/7. He is...no longer with us.

15 minutes ago, Birds said:

I can't keep up with GPU releases these days

Maybe my time awareness isn't on track, but in the teenage years it was a big deal when Nvidia released any new model like the GeForce 2 GTS. Now the number on the end just seems to go up every other month.

It's still a big deal, hell since you got your card 5 years ago there's only been 2 releases (Your 770 > 9xx series > 10xx series) yes they missed the 800 series.

I only just went from old trusty 780ti > 1070GTX last year & still run a 5 year old intel cpu, the only reason to get a newer card these days is if you're running a 4k or 1440p monitor, if you're running a 1080p a potato will suffice. 

/nerdlinesaustralia

8 minutes ago, UNR33L said:

It's still a big deal, hell since you got your card 5 years ago there's only been 2 releases (Your 770 > 9xx series > 10xx series) yes they missed the 800 series.

I only just went from old trusty 780ti > 1070GTX last year & still run a 5 year old intel cpu, the only reason to get a newer card these days is if you're running a 4k or 1440p monitor, if you're running a 1080p a potato will suffice. 

/nerdlinesaustralia

Those are series though...within them they seem to continuously release an array of cards like 1050 1060 1070 1080 1080ti Titan XP etc.

12 minutes ago, Birds said:

Those are series though...within them they seem to continuously release an array of cards like 1050 1060 1070 1080 1080ti Titan XP etc.

True there's a lot in the series but that's just like a car having options that are better but cost more. WRX, WRX Premium, WRX Spec R, WRX STI, WRX STI Premium, WRX STI Spec R etc.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...