Jump to content
SAU Community

Recommended Posts

So i'm going to be converting my car to e85 soon because theres a pump near my house and why not. Been looking at items for the fuel system which i'll need and have a couple of questions, will i need an fpr? if so any suggestions? Im looking at getting 700-800cc injectors, preferably on the cheaper side without needing an aftermarket fuel rail any suggestions? i've found these http://www.ebay.com.au/itm/121546852066?_trksid=p2060353.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIThowever it says they are to suit a top feed rail, is it possible to run a top feed with the standard intake plenum? sorry if they're noob questions, thanks!

Link to comment
https://www.sau.com.au/forums/topic/459048-rb20-e85-conversion/
Share on other sites

I've been using Deatschwerks (Bosch EV14s) for a couple of years now and they're a great injector, they're also available with stainless internals especially for ethanol based fuels.... http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/rb20det/1989-94-rb20det

Should be fine if you keep the 255, the 460 is known to have issues on some cars as the return flow is insufficient. Just make sure you check the base fuel pressure is similar, and that it drops 10psi or so from there at idle.

i've heard of those missileman and aware they're good however i'm wanting something in the 700cc range because i'll be using a nistune and its recommended not to go above 800cc, also compared to the denso they're about 200 extra :(

There are a couple of thread on here which deal with the issues of ethanol fuels and what is required, but if your planing on going the Nistune route, head on over to their forums and introduce yourself... http://forum.nistune.com/index.php

tis up to you, but try not to get too carried away, just because that fuel is available close to home doesn't mean you should go down that path, you have to figure a cost verses benefit analysis and go from there.

Is it really worth the cost to do that with the little old RB20?

I'm currently running 98 with a few mods and no tune whatsoever so I've always planned on getting the car tuned anyway. The main downsides of e85 are it goes off quickly, bad fuel economy and not available everywhere. I daily my car, dont usually drive far distances and have a pump close to home so its not that much of a downside for me. In addition e85 is cheaper than 98 so the bad fuel economy and fuel costs should even out especially considering my car is currently running rich.

So in my eyes its worth it, I'm also considering a turbo upgrade in the future and E85 will help lag and as we all know a laggy rb20 makes for a horrible street car. So the only extra cost really is the injectors which is not too bad

I don't know if E85 is going to reduce the RB20 lag significantly, maybe cam gears would be better, anyway, more data is always good, so there is no harm in reading the "Rb20 Turbo Upgrade, All Dyno Results" sticky from start to finish,and the RB25 one too ;)

More fuel is burnt, more exhaust flow, faster spool up, so it should make a noticable difference. I'm not too worried about lag honestly especially with my setup right now (standard rb25 turbo and usual supporting gear) mainly want to go E85 just because of the extra power across the entire powerband. Gone through most of both threads already. Believe me if i was in the position to i'd be dropping an rb25 in without a moments hesitation haha, its crazy how much power they can make with minimal mods, why didnt nissan put the rb25 in the 32 from the start :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...