Jump to content
SAU Community

Recommended Posts

Hi all,

I have a r34 gtt with a gtx3076, link ecu, Walbro 450lph fuel pump ect.

Anyways its time to upgrade the injectors, I want to put something decent in which will allow me to run E85 down the track without needing to change injectors again. I will need to upgrade the pump & lines when the time comes.

I am looking at these deatschwerks 1000cc E85 compatible injectors:

http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/neo-rb25det/1998-02-neo-rb25det/17u-06-1000-6-detail

Now the question is, are these going to be ok to run 98 pump fuel through without having a shocking idle & part throttle drive ability?

If its going to make the car real rough then I think I will need to go smaller now & then upgrade when I do want to go E85.

Sorry if this is a newb question, I have done some searching but cant find much.

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/459340-98-octane-through-1000cc-injectors/
Share on other sites

They are a high flowed Bosch 550cc injector, so there are better options for 1000cc injectors available now.

http://www.nzefi.com/product/nissan-rb-1000ccmin-top-feed-direct-fit-fuel-injector-kit/

Thanks for all the help.

Sub boy32 are you saying those deatschwerks are actually high flowed 550cc bosch injectors?

Wheezy what brand injectors did you fit?

What sort of power are you guys running on 98?

Sub boy32 are you saying those deatschwerks are actually high flowed 550cc bosch injectors?

I wouldn't stress too much, most of the 1000's sold these days are 750cc injectors with the pintle cap removed. They spray perfectly well, and work better for e85 imo than the long nose 900cc injectors he linked, and cheaper.

Marketing hype...

Id1000

With the dollar the way it is, locally modified and warranted injectors are a much smarter option, considering they are exactly the same Bosch injector. Unless you like paying the ID tax...

With the dollar the way it is, locally modified and warranted injectors are a much smarter option, considering they are exactly the same Bosch injector. Unless you like paying the ID tax...

The new 1300 and 1700s from ID are a whole new ball game though, internals are made inhouse with BOSCH motorpsort department... they are streets above the rest ATM.

The new 1300 and 1700s from ID are a whole new ball game though, internals are made inhouse with BOSCH motorpsort department... they are streets above the rest ATM.

The 1300's are only available through ID, but the 1700's are sold locally also. Not cheap though.

I was hoping to try them out in the evo but the 1400's I have currently will be fine with the Haltech elite i'm sure, and nearly half the price.

The new 1300 and 1700s from ID are a whole new ball game though, internals are made inhouse with BOSCH motorpsort department... they are streets above the rest ATM.

I wonder how much different they are from the stainless Deatscheworks...

http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/rb26dett-skyline/1989-2002-rb26dett/1200cc-fuel-injectors-6-detail

http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/rb26dett-skyline/1989-2002-rb26dett/1500cc-fuel-injectors-8-detail

I wouldn't stress too much, most of the 1000's sold these days are 750cc injectors with the pintle cap removed. They spray perfectly well, and work better for e85 imo than the long nose 900cc injectors he linked, and cheaper.

Marketing hype...

We have done quite a bit of injector testing.

The spray pattern between a high flowed 550/750cc injector compared to the ones I have linked to are night and day different

The Bosch 1000's are designed for Ethanol, where as the 550s weren't......

High flowed injectors were fine when there wasn't the correct sized injector available.....but now Bosch makes 1000's, 1300's and 1650's straight out of the box now.

Edited by Sub Boy32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...